Diesel Generators by Ranges | 50 Hz

HI RANGE

Version

Model

HFW-160 T5

HFW-160 T5 | Three phase | Diesel | Open Skid

Alternator STAMFORD

Emissions STAGE 2

PRP

ESP

COP

Power kVA

157

173

Power kW

125

138

Voltage	Frequency	Phase	Alternator	Type of connection	Generator set data sheet
400/230 V	50 Hz	Three phase	UCI274F	Star-series	Cod.Red :: 1447581

Engine Alternator Version Installation Dimensions

Engine Specifications 1.500 r.p.m.
Rated Engine Output: 135,9kW prp ; 150,2kW standby
Manufacturer: FPT_IVECO
Model: NEF67TM3A
Engine Type: 4-stroke diesel
Injection Type: Direct
Aspiration Type: Turbocharged and after-cooled
Number of cylinders and arrangement: 6-L
Bore and Stroke: 104 x 132 mm
Displacement: 6,7 L
Cooling System: Liquid (water + 50% glycol)
Lube Oil Specifications: ACEA E3 - E5
Compression Ratio: 17,5 : 1
Fuel Consumption ESP: 39 l/h
Fuel Consumption 100% PRP: 36 l/h
Fuel Consumption 80 % PRP: 29 l/h
Fuel Consumption 50 % PRP: 18 l/h
Lube oil consumption with full load: 0,5 % of fuel consumption
Total oil capacity including tubes, filters 17,2 L
Total coolant capacity: 25,5 L
Governor Type Mechanical
Air Filter Type Dry
Inner diameter exhaust pipe: 70 mm
Diesel engine
4-stroke cycle
Water-cooled
12V electrical system
Water separator filter (no visible level)
Dry air filter
Radiator with pusher fan
Mechanical governor
Hot parts protection
Moving parts protection
Radiator water level sensor (Optional)
HTW sender (Optional)
LOP sender (Optional)

Generator: STAMFORD
Model: UCI274F
Poles: 4
Connection type (standard): Star-series
Mounting type: S-3 11"1/2
Insulation: H class
Enclosure (according IEC-34-5): IP23
Exciter system: Self-excited, brushless
Voltage regulator: A.V.R. (Electronic)
Bracket type: Single bearing
Coupling system: Flexible disc
Coating type: Standard (Vacuum impregnation)

- OPEN SET VERSION.
Steel chassis
Emergency stop button
Oil sump extraction kit
Anti-vibration shock absorbers
Chassis with integrated fuel tank
Fuel level gauge
High mechanical strength
Epoxy polyester powder coating
Fuel tank drain plug
Steel industrial silencer -15db(A) attenuation
Fuel transfer pump (Optional)
Steel residential silencer -35db(A) attenuation. (Optional)

- ELECTRICAL SYSTEM.
Electric control and power panel with measurements devices and control unit (according to necessity and configuration)
Adjustable earth leakage protection (time & sensitivity) standard in M5 and AS5, with thermal magnetic protection
Battery charger (standard on gensets with automatic control panels)
Heating resistor (standard on sets with automatic control panels)
Battery charger alternator with ground connection
Starter battery/ies installed (cables and bracket included)
Ground connection electrical installation with connection ready for ground spike (not supplied)
Battery Switch (Optional)
- EXHAUST SYSTEM.
Maximum exhaust temperature: 570 ºC
Exhaust Gas Flow: 0,205 kg/s
Maximum allowed back pressure: 5 kPa
Heat dissipated by exhaust pipe: 688,9 KCal/Kwh
- NECESSARY AMOUNT OF AIR.
Intake air flow: 586 m3/h
Cooling Air Flow: 3,8 m3/s
Alternator fan air flow: 0,514 m3/s
- STARTING SYSTEM.
Starting power: 3 kW
Starting power: 4,08 CV
Recommended battery: 100 Ah
Auxiliary Voltage: 12 Vdc
- FUEL SYSTEM
Fuel Oil Specifications: Diesel
Fuel Tank: 250 L

- DIMENSIONS.
Length: 2.900 mm
Height: 1.576 mm
Width: 900 mm
Maximum shipping volume: 4,11 m3
Weight with liquids in radiator and sump: 1.450 kg
Fuel tank capacity: 250 L
Autonomy: 9 Hours

Dimensions

Length (A)290

Width (B)90

Height (C)158

Weight

Weight with fluids in radiator and crankcase

1450

Fuel capacity

250

Request a Quote

By filling in this form you consent to have your information processed and recorded on our system and for the management of your relationship as a user, client, or candidate for employment Himoinsa.com.
/privacy-policy/eng.html

E-mail *

Name *

Phone

Country *

State/Province *

Comments *

I have read and accept privacy policy *

I agree to receive advertising or promotional information

I do not agree to receive advertising or promotional information

* Required fields

COMPARE

Compare

Necessary

Technical cookies are strictly necessary for our website to function and to be able to navigate through it. These types of cookies are those that, for example, allow us to identify you, give you access to certain restricted parts of the page if necessary, or remember different options or services already selected by you, such as your privacy preferences. Therefore, they are activated by default, your authorization is not required in this regard.

Statistics

The analysis cookies allow us to study the navigation of the users of our website in general (for example, which sections of the page are the most visited, which services are used the most and if they work correctly, etc.). Based on the statistical information on navigation on our website, we can improve both the operation of the page itself and the different services it offers. Therefore, these cookies do not have an advertising purpose, but only serve to make our website work better, adapting to our users in general. By activating them you will contribute to this continuous improvement.

Marketing

Marketing cookies are used to track visitors on web pages. The intention is to show ads relevant and attractive to the individual user, and therefore more valuable to publishers and third-party advertisers.