Region EUROPE
    Version
    HTW-2030 T5 Soundproof
    HTW-2030 T5 Open Skid

    Model

    HTW-2030 T5

    HTW-2030 T5 | Trifásicos | Diésel | Open Skid

    Powered by MITSUBISHI

    Alternator STAMFORD

    PRP
    ESP
    Power kVA
    2021
    2250
    Power kW
    1617
    1800
    Generator set data sheet
    • Engine Specifications 1.500 r.p.m.
    • Rated Output: 1684kW prp ; 1895kW standby
    • Manufacturer: MITSUBISHI
    • Model: S16R PTAA2
    • Engine Type: 4-stroke diesel
    • Injection Type: Direct
    • Aspiration Type: Turbocharged and after-cooled
    • Number of cylinders and arrangement: 16-V
    • Bore and Stroke: 170 x 180 mm
    • Displacement: 65,37 L
    • Cooling System: Water
    • Lube Oil Specifications: API CD or CF SAE 30 or SAE 40
    • Compression Ratio: 14,0:1
    • Fuel Consumption ESP: 454,01 l/h
    • Fuel Consumption 100% PRP: 402,12 l/h
    • Fuel Consumption 75 % PRP: 307,58 l/h
    • Fuel Consumption 50 % PRP: 215,04 l/h
    • Fuel Consumption 25 % PRP: 124,5 l/h
    • Lube oil consumption with full load: 0,8
    • Total oil capacity including tubes, filters 230 L
    • Total coolant capacity: 400 L
    • Governor Type Electrical
    • Air Filter Type Dry
    • Inner diameter exhaust pipe: 340 mm
    • Oil temperature sensor
    • Low coolant level sensor
    • Exhaust gas compensator
    • Diesel engine
    • 4-stroke cycle
    • Water-cooled
    • 24V electrical system
    • Standard air filter
    • Standard fuel filter
    • Standard oil filter
    • Radiator with pusher fan
    • HTW sender
    • LOP sender
    • Electronic governor
    • Hot parts protection
    • Moving parts protection
    • Generator: STAMFORD
    • Model: PI734F
    • Poles: 4
    • Connection type (standard): Star
    • Mounting type: S-00 21"
    • Insulation: H class
    • Enclosure (according IEC-34-5): IP23
    • Exciter system: Self-excited, brushless
    • Voltage regulator: A.V.R. (Electronic)
    • Bracket type: Single bearing
    • Coupling system: Flexible disc
    • Coating type: Standard (Vacuum impregnation)
    • - OPEN SET VERSION.
    • Steel chassis
    • Emergency stop button
    • Oil sump extraction kit
    • Anti-vibration shock absorbers
    • Chassis with integrated fuel tank
    • Fuel level gauge
    • Fuel tank drain plug
    • - ELECTRICAL SYSTEM.
    • Electric control and power panel with measurements devices and control unit (according to necessity and configuration)
    • 4-pole thermal magnetic circuit breaker
    • Connection panel wired to the safety protection (open thermal magnetic protection and alarm)
    • Maintenance-free and anti-explosion battery
    • Battery Switch
    • Battery charger (standard on gensets with automatic control panels)
    • Water Jacket Heater with single phase pump
    • Battery charger alternator with ground connection
    • Starter battery/ies installed (cables and bracket included)
    • Ground connection electrical installation with connection ready for ground spike (not supplied)
    • - EXHAUST SYSTEM.
    • Maximum exhaust temperature: 560 ºC
    • Exhaust Gas Flow: 420 m3/min
    • Maximum allowed back pressure: 600 mm H2o
    • Heat dissipated by exhaust pipe: 641,28 KCal/Kwh
    • - NECESSARY AMOUNT OF AIR.
    • Intake air flow: 9540 m3/h
    • Cooling Air Flow: 41,66 m3/s
    • Alternator fan air flow: 2,69 m3/s
    • - STARTING SYSTEM.
    • Starting power: 7,5 x 2 kW
    • Starting power: 10,2 x 2 CV
    • Recommended battery: 400 Ah
    • Auxiliary Voltage: 24 Vdc
    • Starter current peak: 1250 A
    • Nominal starter current: 400 A
    • - FUEL SYSTEM
    • Fuel Oil Specifications: Diesel
    • Maximum power suction pump: 75 mm Hg
    • Maximum return feed pump: 150 mm Hg
    • Fuel Tank: 450 L
    • - DIMENSIONS.
    • Length: 6.120 mm
    • Height: 2.700 mm
    • Width: 2.190 mm
    • Maximum shipping volume: 36,19 m3
    • Weight with liquids in radiator and sump: 14.820 kg
    • Dry weight: 14.193 kg
    • Fuel tank capacity: 450 L
    • Autonomy: 1 Hours

    Manual control panel

    M5 CEM 7

    Manual Digital Control Panel

    • CEM 7 Digital Control Unit
    • Generator set control and protection
    • External start-up by voltage free contact
    • Magneto-thermal and differential protection

    Automatic control panel

    AS5 CEM 7

    Semi-automatic Digital Control Panel

    • CEM 7 Digital Control Unit
    • Generator set control and protection
    • Battery charger and preheating resistor
    • CAN LAN connection with CC2 external switching (CEC7 control unit) or external start-up by voltage free contact
    • Magneto-thermal and differential protection

    AS5 CEA 7

    Digital Automatic Control Panel without switching

    • CEA 7 Digital Control Unit
    • Generator set and grid control and protection
    • Battery charger and preheating resistor
    • Management and control of external switching (not included)
    • Magneto-thermal and differential protection

    AC5 CEA 7

    Automatic control panel with switching on external panel

    • CEA7 Digital Control Unit
    • Generator set and grid control
    • Electrically and mechanically interlocked contactors or motorised switchgear (depending on amperage) included in the control panel
    • 7 metre, 16-pin connector genset/cabinet hose included

    Dimensions

    Dimensions
    LONG (A)612240.95
    WIDTH (B)21986.22
    HIGHT (C)270106.30

    Weight

    Weight

    Weight with liquid in radiator and carter

    14820

    32678.1

    Fuel capacity

    450

    118.8

    Request a Quote

    Request a Quote

    By filling in this form you are consented to having your data processed and recorded on our system and for the management of your relationship as a user, client or candidate for employment at Himoinsa.
    https://www.himoinsa.com/privacy-policy/eng.html

     privacy policy *
    * Required fields
     

    Necessary

    Technical cookies are strictly necessary for our website to function and to be able to navigate through it. These types of cookies are those that, for example, allow us to identify you, give you access to certain restricted parts of the page if necessary, or remember different options or services already selected by you, such as your privacy preferences. Therefore, they are activated by default, your authorization is not required in this regard.

    Statistics

    The analysis cookies allow us to study the navigation of the users of our website in general (for example, which sections of the page are the most visited, which services are used the most and if they work correctly, etc.). Based on the statistical information on navigation on our website, we can improve both the operation of the page itself and the different services it offers. Therefore, these cookies do not have an advertising purpose, but only serve to make our website work better, adapting to our users in general. By activating them you will contribute to this continuous improvement.

    Marketing

    Marketing cookies are used to track visitors on web pages. The intention is to show ads relevant and attractive to the individual user, and therefore more valuable to publishers and third-party advertisers.