HFW-600 T5

 

HFW-600 T5

599 kVA Generator set Open Skid

Powered by: FPT_IVECO
Alternator: MECC ALTE

 

Three phase | 50 Hz | Diesel |

 

 

  • Engine Specifications 1.500 r.p.m.
  • Rated Output: 504kW prp ; 556kW standby
  • Manufacturer: FPT_IVECO
  • Model: CR16 TE1W
  • Engine Type: 4-stroke diesel
  • Injection Type: Direct
  • Aspiration Type: Turbocharged and after-cooled
  • Number of cylinders and arrangement: 6 - L
  • Bore and Stroke: 141 x 170 mm
  • Displacement: 15,9 L
  • Cooling System: Liquid (water + 50% glycol)
  • Lube Oil Specifications: ACEA E3 - E5
  • Compression Ratio: 16,5:1
  • Fuel Consumption ESP: 128,6 l/h
  • Fuel Consumption 100% PRP: 115,12 l/h
  • Fuel Consumption 80 % PRP: 91,98 l/h
  • Fuel Consumption 50 % PRP: 58,49 l/h
  • Lube oil consumption with full load: 0,2 % of fuel consumption
  • Total oil capacity including tubes, filters 38 L
  • Total coolant capacity: 66,5 L
  • Governor Type Electrical
  • Air Filter Type Dry
  • Diesel engine
  • 4-stroke cycle
  • Water-cooled
  • 24V electrical system
  • Water separator filter (no visible level)
  • Dry air filter
  • Radiator with pusher fan
  • Radiator water level sensor
  • HTW sender
  • LOP sender
  • Electronic governor
  • Hot parts protection
  • Moving parts protection
  • - GENERATOR.
  • Poles: 4
  • Connection type (standard): Star - Parallel
  • Mounting type: S-1 14"
  • Insulation: H class
  • Enclosure (according IEC-34-5): IP23
  • Exciter system: Self-excited, brushless
  • Voltage regulator: A.V.R. (Electronic)
  • Bracket type: Single bearing
  • Coupling system: Flexible disc
  • Coating type: Standard (Vacuum impregnation)
  • - OPEN SET VERSION.
  • Steel chassis
  • Emergency stop button
  • Oil sump extraction kit
  • Anti-vibration shock absorbers
  • Chassis with integrated fuel tank
  • Fuel level gauge
  • High mechanical strength
  • Epoxy polyester powder coating
  • Fuel tank drain plug
  • Steel industrial silencer -15db(A) attenuation
  • Fuel transfer pump (Optional)
  • Steel residential silencer -35db(A) attenuation. (Optional)
  • - ELECTRICAL SYSTEM.
  • Electric control and power panel with measurements devices and control unit (according to necessity and configuration)
  • 4-pole thermal magnetic circuit breaker
  • Battery Switch
  • Adjustable earth leakage protection (time & sensitivity) standard in M5 and AS5, with thermal magnetic protection
  • Battery charger (standard on gensets with automatic control panels)
  • Heating resistor (standard on sets with automatic control panels)
  • Battery charger alternator with ground connection
  • Starter battery/ies installed (cables and bracket included)
  • Ground connection electrical installation with connection ready for ground spike (not supplied)
  • - EXHAUST SYSTEM.
  • Maximum exhaust temperature: 557 ºC
  • Maximum allowed back pressure: 7 kPa
  • - NECESSARY AMOUNT OF AIR.
  • Intake air flow: 2630 m3/h
  • Cooling Air Flow: 10,53 m3/s
  • Alternator fan air flow: 0,9 m3/s
  • - STARTING SYSTEM.
  • Starting power: 5,5 kW
  • Starting power: 7,48 CV
  • Recommended battery: 185 Ah
  • Auxiliary Voltage: 24 Vdc
  • - FUEL SYSTEM
  • Fuel Oil Specifications: Diesel
  • Fuel Tank: 740 L
  • - DIMENSIONS.
  • Length: 3.600 mm
  • Height: 1.990 mm
  • Width: 1.460 mm
  • Maximum shipping volume: 10,46 m3
  • Weight with liquids in radiator and sump: 3.595 kg
  • Fuel tank capacity: 740 L
  • Autonomy: 8 Hours
Electrical Equipment
Water jacket heater F490
Fuel Feeding System
Water separator filter F400DS300
Water separator filter F400DS300 - With alarm
Electric fuel transfer pump SC / M6
Electric fuel transfer pump
Residential Silencer
Residential Silencer
Protections
Earth Leakage Protection to 630A from 800A to 3200A
CEx Optionals
Telesignal
Kit CAN / LAN
Change over power source unit AC5 / CC2
Repetitive display: Remote Screen
Alarm Indicator Panel RAM7
Kit CAN/RS-485
Kit MODBUS TCP/IP
Kit CAN Profibus
Kit CAN/SNMP
Fleet Manager Module - C2CLOUD
C2CLOUD - 3G/GRPS and GPS
Kit CAN/LAN HG
Deepsea Options
DSE2133: RTD/THERMOCOUPLE Input Expansion Module
DSE2130:Input Expansion Module
DSE2157:Output Expansion Module
DSE2548:Led Output Expansion Module
DSE2152: Analog Outputs Module
DSE2131:Digital / Resistive inputs module
DSE890
Thermal Magnetic Protection
Change from 4P to 3P for 1000A
Change from 4P to 3P for 1600A
Extra to change to motorized circuit breaker 1000A
Extra to change to motorized circuit breaker 1600A
Deepsea
Change of CEx for DSE7310
Change of CEx for DSE7320 controller

Power


kVA

599
 
659
Prime power  (26 - 625)
Stand by  (29 - 690)

kW

479
 
527
Prime power  (24 - 500)
Stand by  (26 - 552)
 

Sound level

 dB
 Distance (m)

 
 

dimensions


 
dimensions
Long (A)
360
Width (B)
146
High (C)
199
 

Weight


 
Weight
Weight with liquid in radiator and carter

3.595
 

Fuel capacity


 
 
740