HRFW-500 T5

 

HRFW-500 T5

489 kVA Generator set Rental

Powered by: FPT_IVECO
Alternator: MECC ALTE

 

Three phase | 50 Hz | Diesel |

 

 

  • Engine Specifications 1.500 r.p.m.
  • Rated Output: 423,9kW prp ; 457,9kW standby
  • Manufacturer: FPT_IVECO
  • Model: C13TE7
  • Engine Type: 4-stroke diesel
  • Injection Type: Direct, common rail
  • Aspiration Type: Turbocharged and after-cooled
  • Number of cylinders and arrangement: 16 - V
  • Bore and Stroke: 135 x 150 mm
  • Displacement: 12,88 L
  • Cooling System: Liquid (water + 50% glycol)
  • Lube Oil Specifications: ACEA E3 - E5
  • Compression Ratio: 16,5:1
  • Fuel Consumption ESP: 112,6 l/h
  • Fuel Consumption 100% PRP: 100,6 l/h
  • Fuel Consumption 80 % PRP: 80,2 l/h
  • Fuel Consumption 50 % PRP: 51,5 l/h
  • Lube oil consumption with full load: 0,5 % of fuel consumption
  • Total oil capacity including tubes, filters 32 L
  • Total coolant capacity: 38,1 L
  • Governor Type Electrical
  • Air Filter Type Dry
  • Inner diameter exhaust pipe: 108 mm
  • Diesel engine
  • 4-stroke cycle
  • Water-cooled
  • 24V electrical system
  • Water separator filter (no visible level)
  • Dry air filter
  • Radiator with pusher fan
  • Radiator water level sensor
  • HTW sender
  • LOP sender
  • Electronic governor
  • Hot parts protection
  • Moving parts protection
  • - GENERATOR.
  • Poles: 4
  • Connection type (standard): Star - Parallel
  • Mounting type: S-1 14"
  • Insulation: H class
  • Enclosure (according IEC-34-5): IP23
  • Exciter system: Self-excited, brushless
  • Voltage regulator: A.V.R. (Electronic)
  • Bracket type: Single bearing
  • Coupling system: Flexible disc
  • Coating type: Standard (Vacuum impregnation)
  • - SOUNDPROOFED VERSION.
  • Steel chassis
  • Anti-leakage chassis, predisposed to retain liquids (retention tray)
  • High capacity fuel tank, with contention base and easy external filling
  • Manhole for fuel tank cleaning and drainage
  • Manhole for chassis cleaning
  • Oversized chassis to protect the bodywork
  • Slide carriage and brackets for transportation with forklift
  • Tilting cap in the exhaust
  • Manhole to fill the radiator
  • Pre-installation or niche to house the quick connection hydraulic fittings for fuel transfer
  • Anti-vibration shock absorbers
  • Chassis with integrated fuel tank
  • Fuel level gauge
  • Bodywork made from high quality steel plate
  • High mechanical strength
  • Low noise emissions level
  • Soundproofing provided by high-density volcanic rock wool
  • Epoxy polyester powder coating
  • Full access for maintenance (water, oil and filters, no need to remove the canopy)
  • Reinforced lifting hooks for crane hoisting
  • Steel residential silencer -35db(A) attenuation.
  • Oil sump extraction kit
  • External filling of the fuel tank with safety key
  • Emergency stop button (double emergency stop protection: Interior on the panel + Exterior on the bodywork)
  • Mechanized for power cable output
  • Door with window to visualize control panel, alarms and measurements
  • Pressure locks
  • IP Protection according to ISO 8528-13:2016
  • 3 way valve for external fuel supply (available in 1/2" and 3/8" fittings) (Optional)
  • Fuel transfer pump (Optional)
  • - ELECTRICAL SYSTEM.
  • M5 control panel with electronic CEM7 control unit and switched emergency stop
  • Power panel with built-in circuit breaker plates
  • Safety relay in output terminal board (thermal magnetic trip and alarm in control unit)
  • Battery Switch
  • Adjustable earth leakage protection (time & sensitivity) standard in M5 and AS5, with thermal magnetic protection
  • 4-pole thermal magnetic circuit breaker
  • Battery charger alternator with ground connection
  • Starter battery/ies installed (cables and bracket included)
  • Ground connection electrical installation with connection ready for ground spike (not supplied)
  • - EXHAUST SYSTEM.
  • Maximum exhaust temperature: 520 ºC
  • Maximum allowed back pressure: 50 mbar
  • Exhaust Flange Size (external diameter): 140 mm
  • Heat dissipated by exhaust pipe: 581 KCal/Kwh
  • - NECESSARY AMOUNT OF AIR.
  • Intake air flow: 1576 m3/h
  • Cooling Air Flow: 10,9 m3/s
  • Alternator fan air flow: 0,9 m3/s
  • - STARTING SYSTEM.
  • Starting power: 7,8 kW
  • Starting power: 10,61 CV
  • Recommended battery: 50 x 2 Ah
  • Auxiliary Voltage: 24 Vdc
  • - FUEL SYSTEM
  • Fuel Oil Specifications: Diesel
  • Fuel Tank: 1.660 L
  • - DIMENSIONS.
  • Length: 4.200 mm
  • Height: 2.665 mm
  • Width: 1.650 mm
  • Maximum shipping volume: 18,47 m3
  • Weight with liquids in radiator and sump: 5.425 kg
  • Fuel tank capacity: 1.660 L
  • Autonomy: 21 Hours
  • Sound pressure level: 77 ± 2,4 dB(A)@7m
Fuel Feeding System
3 way valve fuel filling
Electric fuel transfer pump
Water separator filter with alarm
Residential Silencer
Residential Silencer E240P320M405N420K435F440D510
CEx Optionals
Telesignal
Kit CAN / LAN
Repetitive display: Remote Screen
Alarm Indicator Panel RAM7
Kit CAN/RS-485
Kit MODBUS TCP/IP
Kit CAN Profibus
Kit CAN/SNMP
Fleet Manager Module - C2CLOUD
C2CLOUD - 3G/GRPS and GPS
Kit CAN/LAN HG
Thermal Magnetic Protection
Change from 4P to 3P for 800A
Extra to change to motorized circuit breaker 800A
Fuel tank Leakage
Bund leak detector
Deepsea
Change of CEx for DSE7310
Change of CEx for DSE7320 controller

Power


kVA

489
 
540
Prime power  (35 - 626)
Stand by  (63 - 690)

kW

391
 
432
Prime power  (48 - 501)
Stand by  (50 - 633)
 

Sound level

 dB
 Distance (m)

 
 

dimensions


 
dimensions
Long (A)
420
Width (B)
165
High (C)
266,50
 

Weight


 
Weight
Weight with liquid in radiator and carter

5.425
 

Fuel capacity


 
 
1.660