HMW-905 T5

 

HMW-905 T5

906 kVA Generator set Soundproof

Powered by: MTU
Alternator: STAMFORD

 

Three phase | 50 Hz | Diesel |

 

 

  • Engine Specifications 1.500 r.p.m.
  • Rated Output: 762,6kW prp ; 843,6kW standby
  • Manufacturer: MTU
  • Model: 16V2000G16F
  • Engine Type: 4-stroke diesel
  • Injection Type: Direct
  • Aspiration Type: Turbocharged and after-cooled
  • Number of cylinders and arrangement: 16-V
  • Bore and Stroke: 135 x 156 mm
  • Displacement: 35,7 L
  • Cooling System: Water
  • Lube Oil Specifications: ACEA E4, E6, E7, E9
  • Compression Ratio: 17,5
  • Fuel Consumption ESP: 198,03 l/h
  • Fuel Consumption 100% PRP: 179,94 l/h
  • Fuel Consumption 75 % PRP: 137,07 l/h
  • Fuel Consumption 50 % PRP: 95,60 l/h
  • Fuel Consumption 25 % PRP: 53,66 l/h
  • Lube oil consumption with full load: 0,8 % of fuel consumption
  • Total oil capacity including tubes, filters 114 L
  • Total coolant capacity: 150 L
  • Governor Type Electrical
  • Air Filter Type Dry
  • Electronic management (ADEC)
  • Low coolant level sensor
  • Exhaust gas compensator
  • Diesel engine
  • 4-stroke cycle
  • Water-cooled
  • 24V electrical system
  • Standard air filter
  • Standard fuel filter
  • Standard oil filter
  • Radiator with pusher fan
  • HTW sender
  • LOP sender
  • Hot parts protection
  • Moving parts protection
  • Self-excited and self-regulated
  • 4 poles
  • AVR governor
  • IP23 protection
  • H class insulation
  • Electric control and power panel with measurements devices and control unit (according to necessity and configuration)
  • 4-pole thermal magnetic circuit breaker
  • Connection panel wired to the safety protection (open thermal magnetic protection and alarm)
  • Maintenance-free and anti-explosion battery
  • Battery Switch
  • Battery charger (standard on gensets with automatic control panels)
  • Water Jacket Heater with single phase pump
  • Battery charger alternator with ground connection
  • Starter battery/ies installed (cables and bracket included)
  • Ground connection electrical installation with connection ready for ground spike (not supplied)
  • Steel chassis
  • Anti-vibration shock absorbers
  • Chassis with integrated fuel tank
  • Fuel level gauge
  • External emergency stop switch
  • Bodywork made from high quality steel plate
  • High mechanical strength
  • Low noise emissions level
  • Soundproofing provided by high-density volcanic rock wool
  • Epoxy polyester powder coating
  • Full access for maintenance (water, oil and filters, no need to remove the canopy)
  • Reinforced lifting hooks for crane hoisting
  • Chassis drain plug
  • Steel residential silencer -35db(A) attenuation.
  • Oil sump extraction kit
  • Generator
  • Poles: 4
  • Connection type (standard): Star-series
  • Mounting type: S-0 18''
  • Insulation: H class
  • Enclosure (according IEC-34-5): IP23
  • Exciter system: Self-excited, brushless
  • Voltage regulator: A.V.R. (Electronic)
  • Bracket type: Single bearing
  • Coupling system: Flexible disc
  • Coating type: Standard (Vacuum impregnation)
  • - Electrical system.
  • Electric control and power panel with measurements devices and control unit (according to necessity and configuration)
  • Connection panel wired to the safety protection (open thermal magnetic protection and alarm)
  • Maintenance-free and anti-explosion battery
  • Battery Switch
  • 4-pole thermal magnetic circuit breaker
  • Battery charger (standard on gensets with automatic control panels)
  • Water Jacket Heater with single phase pump
  • Battery charger alternator with ground connection
  • Starter battery/ies installed (cables and bracket included)
  • Ground connection electrical installation with connection ready for ground spike (not supplied)
  • - Soundproofed version.
  • Steel chassis
  • Anti-vibration shock absorbers
  • Chassis with integrated fuel tank
  • Fuel level gauge
  • External emergency stop switch
  • Bodywork made from high quality steel plate
  • High mechanical strength
  • Low noise emissions level
  • Soundproofing provided by high-density volcanic rock wool
  • Epoxy polyester powder coating
  • Full access for maintenance (water, oil and filters, no need to remove the canopy)
  • Reinforced lifting hooks for crane hoisting
  • Chassis drain plug
  • Steel residential silencer -35db(A) attenuation.
  • Oil sump extraction kit
  • - EXHAUST SYSTEM.
  • Maximum exhaust temperature: 545 ºC
  • Exhaust Gas Flow: 166,2 m3/min
  • Maximum allowed back pressure: 50 mbar
  • Exhaust Flange Size (external diameter): 200 mm
  • - NECESSARY AMOUNT OF AIR.
  • Intake air flow: 3672 m3/h
  • Cooling Air Flow: 24,37 m3/s
  • Alternator fan air flow: 1,614 m3/s
  • - STARTING SYSTEM.
  • Starting power: 7,5 kW
  • Starting power: 10,2 CV
  • Recommended battery: 200 Ah
  • Auxiliary Voltage: 24 Vdc
  • - FUEL SYSTEM
  • Fuel Oil Specifications: Diesel
  • Fuel Tank: 1.000 L
  • - Dimensions.
  • Length: 5.960 mm
  • Height: 2.856 mm
  • Width: 2.622 mm
  • Maximum shipping volume: 44,63 m3
  • Weight with liquids in radiator and sump: 10.495 kg
  • Fuel tank capacity: 1.000 L
  • Autonomy: 7 Hours
  • Sound pressure level: 81 dB(A)@7m
Engine
Oil sump extraction kit 70
Electrical Equipment
Water Jacket heater M1270
Fuel Feeding System
3 Way valve fuel filling
Manual fuel transfer pump
Electric fuel transfer pump SC / M6
Electric fuel transfer pump
Socket Boxes
CBR25 M5 Socket boxes
CBR25 AS5 Socket boxes
Protections
Earth Leakage Protection to 630A from 800A to 3200A
CEx Optionals
Telesignal
Kit CAN / LAN
Change over power source unit AC5 / CC2
Repetitive display: Remote Screen
Alarm Indicator Panel RAM7
Kit CAN/RS-485
Kit CAN/USB
Kit MODBUS TCP/IP
Kit CAN Profibus
Kit CAN/SNMP
Fleet Manager Module - C2CLOUD
C2CLOUD - 3G/GRPS and GPS
Kit CAN/LAN HG
Deepsea Optionals
DSE2133: RTD/THERMOCOUPLE Input Expansion Module
DSE2130:Input Expansion Module
DSE2157:Output Expansion Module
DSE2548:Led Output Expansion Module
DSE2152: Analog Outputs Module
DSE2131:Digital / Resistive inputs module
DSE890
Thermal Magnetic Protection
Change from 4P to 3P for 1600A
Change from 4P to 3P for 2500A
Extra to change to motorized circuit breaker 1600A
Extra to change to motorized circuit breaker 2500A
Deepsea
Change of CEx for DSE7310
Change of CEx for DSE7320 controller

Power


kVA

906
 
999
Prime power  (457 - 2572)
Stand by  (504 - 2809)

kW

725
 
799
Prime power  (365 - 2058)
Stand by  (403 - 2247)
 

Sound level

 dB
 Distance (m)

 
 

dimensions


 
dimensions
Long (A)
596
Width (B)
262,20
High (C)
285,60
 

Weight


 
Weight
Weight with liquid in radiator and carter

10.495
 

Fuel capacity


 
 
1.000