1892 kVA Generator set Diesel HTW-1900 T5 Open Skid

Power Solutions

DC RANGE

HP RANGE

MV RANGE

Back

Region EUROPE

Choose your region

Version

Model

HTW-1900 T5

HTW-1900 T5 | Three phase | Diesel | Open Skid

Alternator STAMFORD

PRP

ESP

COP

Power kVA

1892

2035

Power kW

1514

1628

BIM ObjectDownload

Voltage	Frequency	Phase	Alternator	Type of connection	Generator set data sheet
400/230 V	50 Hz	Three phase	S7L1D.F4	Star	Cod.Red :: 1246105321

Engine Alternator Version Installation Dimensions

Engine Specifications 1.500 r.p.m.
Rated Engine Output: 1580kW prp ; 1740kW standby
Manufacturer: MITSUBISHI
Model: S16R PTA2
Engine Type: 4-stroke diesel
Injection Type: Direct
Aspiration Type: Turbocharged and after-cooled
Number of cylinders and arrangement: 16-V
Bore and Stroke: 170 x 180 mm
Displacement: 65,37 L
Cooling System: Water
Lube Oil Specifications: API CD or CF SAE 30 or SAE 40
Compression Ratio: 13,5:1
Fuel Consumption ESP: 423,75 l/h
Fuel Consumption 100% PRP: 387,28 l/h
Fuel Consumption 75 % PRP: 297,96 l/h
Fuel Consumption 50 % PRP: 209,88 l/h
Fuel Consumption 25 % PRP: 121,18 l/h
Lube oil consumption with full load: 0,8
Total oil capacity including tubes, filters 230 L
Total coolant capacity: 445 L
Governor Type Electrical
Air Filter Type Dry
Inner diameter exhaust pipe: 340 mm
Oil temperature sensor
Low coolant level sensor
Exhaust gas compensator
Diesel engine
4-stroke cycle
Water-cooled
24V electrical system
Standard air filter
Standard fuel filter
Standard oil filter
Radiator with pusher fan
HTW sender
LOP sender
Electronic governor
Hot parts protection
Moving parts protection

Generator: STAMFORD
Model: S7L1D.F4
Poles: 4
Connection type (standard): Star
Mounting type: S-00 21"
Insulation: H class
Enclosure (according IEC-34-5): IP23
Voltage regulator: A.V.R. (Electronic)
Bracket type: Single bearing
Coupling system: Flexible disc
Coating type: Standard (Vacuum impregnation)

- OPEN SET VERSION.
Steel chassis
Emergency stop button
Oil sump extraction kit
Anti-vibration shock absorbers
Chassis with integrated fuel tank
Fuel level gauge
Fuel tank drain plug

- ELECTRICAL SYSTEM.
Electric control and power panel with measurements devices and control unit (according to necessity and configuration)
Connection panel wired to the safety protection (open thermal magnetic protection and alarm)
Maintenance-free and anti-explosion battery
Battery Switch
Battery charger (standard on gensets with automatic control panels)
Water Jacket Heater with single phase pump
Battery charger alternator with ground connection
Starter battery/ies installed (cables and bracket included)
Ground connection electrical installation with connection ready for ground spike (not supplied)
- EXHAUST SYSTEM.
Maximum exhaust temperature: 560 ºC
Exhaust Gas Flow: 379 m3/min
Maximum allowed back pressure: 600 mm H2o
Heat dissipated by exhaust pipe: 587,2 KCal/Kwh
- NECESSARY AMOUNT OF AIR.
Intake air flow: 8580 m3/h
Cooling Air Flow: 34 m3/s
Alternator fan air flow: 2,52 m3/s
- STARTING SYSTEM.
Starting power: 7,5 x 2 kW
Starting power: 10,2 x 2 CV
Recommended battery: 400 Ah
Auxiliary Voltage: 24 Vdc
Starter current peak: 1250 A
Nominal starter current: 400 A
- FUEL SYSTEM
Fuel Oil Specifications: Diesel
Maximum power suction pump: 75 mm Hg
Maximum return feed pump: 150 mm Hg
Fuel Tank: 450 L

- DIMENSIONS.
Length: 5.338 mm
Height: 2.602 mm
Width: 2.042 mm
Maximum shipping volume: 28,36 m3
Weight with liquids in radiator and sump: 13.600 kg
Dry weight: 13.026 kg
Fuel tank capacity: 450 L
Autonomy: 2 Hours

Dimensions

Length (A)534

Width (B)204

Height (C)260

Weight

Weight with fluids in radiator and crankcase

13600

Fuel capacity

450

Request a Quote

By filling in this form you consent to have your information processed and recorded on our system and for the management of your relationship as a user, client, or candidate for employment Himoinsa.com.
/privacy-policy/eng.html

E-mail *

Name *

Phone

Country *

State/Province *

Comments *

I have read and accept privacy policy *

I agree to receive advertising or promotional information

I do not agree to receive advertising or promotional information

* Required fields

COMPARE

Compare

Necessary

Technical cookies are strictly necessary for our website to function and to be able to navigate through it. These types of cookies are those that, for example, allow us to identify you, give you access to certain restricted parts of the page if necessary, or remember different options or services already selected by you, such as your privacy preferences. Therefore, they are activated by default, your authorization is not required in this regard.

Statistics

The analysis cookies allow us to study the navigation of the users of our website in general (for example, which sections of the page are the most visited, which services are used the most and if they work correctly, etc.). Based on the statistical information on navigation on our website, we can improve both the operation of the page itself and the different services it offers. Therefore, these cookies do not have an advertising purpose, but only serve to make our website work better, adapting to our users in general. By activating them you will contribute to this continuous improvement.

Marketing

Marketing cookies are used to track visitors on web pages. The intention is to show ads relevant and attractive to the individual user, and therefore more valuable to publishers and third-party advertisers.