HRFW-125 T5

 

HRFW-125 T5

120 kVA Generator set Rental

Powered by: FPT_IVECO
Alternator: STAMFORD

 

Three phase | 50 Hz | Diesel |

 

 

  • Engine Specifications 1.500 r.p.m.
  • Rated Output: 107,2kW prp ; 118,2kW standby
  • Manufacturer: FPT_IVECO
  • Model: NEF45TM3
  • Engine Type: 4-stroke diesel
  • Injection Type: Direct
  • Aspiration Type: Turbocharged and after-cooled
  • Number of cylinders and arrangement: 4 - L
  • Bore and Stroke: 104 x 132 mm
  • Displacement: 4,5 L
  • Cooling System: Liquid (water + 50% glycol)
  • Lube Oil Specifications: ACEA E3 - E5
  • Compression Ratio: 17,5:1
  • Fuel Consumption ESP: 30,4 l/h
  • Fuel Consumption 100% PRP: 27,6 l/h
  • Fuel Consumption 80 % PRP: 21,6 l/h
  • Fuel Consumption 50 % PRP: 14,4 l/h
  • Lube oil consumption with full load: 0,5 % of fuel consumption
  • Total oil capacity including tubes, filters 12,8 L
  • Total coolant capacity: 18,5 L
  • Governor Type Mechanical
  • Air Filter Type Dry
  • Inner diameter exhaust pipe: 70,3 mm
  • Diesel engine
  • 4-stroke cycle
  • Water-cooled
  • 12V electrical system
  • Water separator filter (no visible level)
  • Dry air filter
  • Radiator with blower fan
  • Mechanical governor
  • Hot parts protection
  • Moving parts protection
  • Self-excited and self-regulated
  • IP23 protection
  • H class insulation
  • M5 control panel with electronic CEM7 control unit and switched emergency stop
  • Power panel with built-in circuit breaker plates
  • Safety relay in output terminal board (thermal magnetic trip and alarm in control unit)
  • Adjustable earth leakage protection (time & sensitivity) standard in M5 and AS5, with thermal magnetic protection
  • 4-pole thermal magnetic circuit breaker
  • Battery charger alternator with ground connection
  • Starter battery/ies installed (cables and bracket included)
  • Ground connection electrical installation with connection ready for ground spike (not supplied)
  • Battery isolator (opcional)
  • Steel chassis
  • Anti-leakage chassis, predisposed to retain liquids (retention tray)
  • Manhole for fuel tank cleaning and drainage
  • Manhole for chassis cleaning
  • Oversized chassis to protect the bodywork
  • Slide carriage and brackets for transportation with forklift
  • Tilting cap in the exhaust
  • Manhole to fill the radiator
  • Pre-installation or niche to house the quick connection hydraulic fittings for fuel transfer
  • Anti-vibration shock absorbers
  • Chassis with integrated fuel tank
  • Fuel level gauge
  • Bodywork made from high quality steel plate
  • High mechanical strength
  • Low level of noise emissions
  • Soundproofing provided by high-density volcanic rock wool
  • Epoxy polyester powder coating
  • Full access for maintenance (water, oil and filters, no need to remove the bonnet)
  • Reinforced lifting hooks for crane hoisting
  • Steel residential silencer -35db(A) attenuation.
  • Oil sump extraction kit
  • Versatility to assemble a high capacity chassis with a metallic fuel tank
  • External filling of the fuel tank with safety key
  • Emergency stop button (double emergency stop protection: Interior on the panel + Exterior on the bodywork)
  • Mechanized for power cable output
  • Door with window to visualize control panel, alarms and measurements
  • Pressure locks
  • IP Protection according to ISO 8528-13:2016
  • 3 way valve for external fuel supply (available in 1/2" and 3/8" fittings) (opcional)
  • Fuel transfer pump (opcional)
  • Generator
  • Poles: 4
  • Connection type (standard): Star-series
  • Mounting type: S-3 11"1/2
  • Insulation: H class
  • Enclosure (according IEC-34-5): IP23
  • Exciter system: Self-excited, brushless
  • Voltage regulator: A.V.R. (Electronic)
  • Bracket type: Single bearing
  • Coupling system: Flexible disc
  • Coating type: Standard (Vacuum impregnation)
  • - Electrical system.
  • M5 control panel with electronic CEM7 control unit and switched emergency stop
  • Power panel with built-in circuit breaker plates
  • Safety relay in output terminal board (thermal magnetic trip and alarm in control unit)
  • Adjustable earth leakage protection (time & sensitivity) standard in M5 and AS5, with thermal magnetic protection
  • 4-pole thermal magnetic circuit breaker
  • Battery charger alternator with ground connection
  • Starter battery/ies installed (cables and bracket included)
  • Ground connection electrical installation with connection ready for ground spike (not supplied)
  • Battery isolator Optional
  • - Soundproofed version.
  • Manhole to fill the radiator
  • Pre-installation or niche to house the quick connection hydraulic fittings for fuel transfer
  • Anti-leakage chassis, predisposed to retain liquids (retention tray)
  • Manhole for fuel tank cleaning and drainage
  • Manhole for chassis cleaning
  • Oversized chassis to protect the bodywork
  • Slide carriage and brackets for transportation with forklift
  • Tilting cap in the exhaust
  • Steel chassis
  • Anti-vibration shock absorbers
  • Chassis with integrated fuel tank
  • Fuel level gauge
  • Bodywork made from high quality steel plate
  • High mechanical strength
  • Low level of noise emissions
  • Soundproofing provided by high-density volcanic rock wool
  • Epoxy polyester powder coating
  • Full access for maintenance (water, oil and filters, no need to remove the bonnet)
  • Reinforced lifting hooks for crane hoisting
  • Steel residential silencer -35db(A) attenuation.
  • Oil sump extraction kit
  • Versatility to assemble a high capacity chassis with a metallic fuel tank
  • External filling of the fuel tank with safety key
  • Emergency stop button (double emergency stop protection: Interior on the panel + Exterior on the bodywork)
  • Mechanized for power cable output
  • Door with window to visualize control panel, alarms and measurements
  • Pressure locks
  • IP Protection according to ISO 8528-13:2016
  • 3 way valve for external fuel supply (available in 1/2" and 3/8" fittings) Optional
  • Fuel transfer pump Optional
  • - EXHAUST SYSTEM.
  • Maximum exhaust temperature: 540 ºC
  • Maximum allowed back pressure: 5 kPa
  • Exhaust Flange Size (external diameter): 90 mm
  • Heat dissipated by exhaust pipe: 590 KCal/Kwh
  • - NECESSARY AMOUNT OF AIR.
  • Intake air flow: 427 m3/h
  • Cooling Air Flow: 2,2 m3/s
  • Alternator fan air flow: 0,514 m3/s
  • - STARTING SYSTEM.
  • Starting power: 3 kW
  • Starting power: 4,08 CV
  • Recommended battery: 100 Ah
  • Auxiliary Voltage: 12 Vdc
  • - FUEL SYSTEM
  • Fuel Oil Specifications: Diesel
  • Fuel Tank: 240 L
  • Other fuel tank capacities: 450, 850, 240 L
  • - Dimensions.
  • Length: 2.810 mm
  • Height: 1.782 mm
  • Width: 1.150 mm
  • Maximum shipping volume: 5,76 m3
  • Weight with liquids in radiator and sump: 1.800 kg
  • Fuel tank capacity: 240 L
  • Autonomy: 11 Hours
  • Sound pressure level: 69 dB(A)@7m
Engine
Electronic Governor FTP-Iveco
Senders WT/OP
Electrical Equipment
Battery Isolator
Radiator water level sender
Fuel Feeding System
3 Way valve fuel filling
Decanter filter with alarm
Protection Options
Anticondensation Heater F200
High Capacity Fuel Tank
High Capacity fuel tank - 450L - D10
High Capacity fuel tank - 850L - D10
CEx Optionals
Telesignal
Kit CAN / LAN
Repetitive display: Remote Screen
Alarm Indicator Panel RAM7
Kit CAN/RS-485
Kit CAN/USB
Kit MODBUS TCP/IP
Kit CAN Profibus
Kit CAN/SNMP
Fleet Manager Module - C2CLOUD
C2CLOUD - 3G/GRPS and GPS
Kit CAN/LAN HG
Thermal Magnetic Protection
Change from 4P to 3P for 250A
Motorized circuit breaker 250A
Advantage Version
Advantage Version Rental FPT-Iveco
Fuel tank Leakage
Bund level detector
Deepsea
Change of CEx for DSE7310
Change of CEx for DSE7320 controller

Power


kVA

120
 
130
Prime power  (60 - 626)
Stand by  (63 - 690)

kW

96
 
104
Prime power  (48 - 501)
Stand by  (50 - 633)
 

Sound level

 dB
 Distance (m)

 
 

dimensions


 
dimensions
Long (A)
281
Width (B)
115
High (C)
178,20
 

Weight


 
Weight
Weight with liquid in radiator and carter

1.800
 

Fuel capacity


 
 
240
 

dimensions


 
dimensions
Long (A)
281
Width (B)
115
High (C)
192,80
 

Weight


 
Weight
Weight with liquid in radiator and carter

1.950
 

Fuel capacity


 
 
450
 

dimensions


 
dimensions
Long (A)
281
Width (B)
115
High (C)
220,10
 

Weight


 
Weight
Weight with liquid in radiator and carter

2.080
 

Fuel capacity


 
 
850
 

dimensions


 
dimensions
Long (A)
281
Width (B)
115
High (C)
178,20
 

Weight


 
Weight
Weight with liquid in radiator and carter

1.820
 

Fuel capacity


 
 
240