Region EUROPE
    Version
    Model: HTW-2020 T6 Soundproof 40FT-HC
    Model: HTW-2020 T6 Open Skid Estático Estándar

    Model

    HTW-2020 T6

    HTW-2020 T6 | Three phase | Diesel | Open Skid

    Model

    Powered by MITSUBISHI

    Alternator STAMFORD

    PRP
    ESP
    COP
    Power kVA
    2269
    2518
    Power kW
    1815
    2014
    Generator set data sheet
    BIM ObjectDownload
    • Engine Specifications 1.800 r.p.m.
    • Rated Engine Output: 1895kW prp ; 2105kW standby
    • Manufacturer: MITSUBISHI
    • Model: S16R PTAA2
    • Engine Type: 4-stroke diesel
    • Injection Type: Direct
    • Aspiration Type: Turbocharged and after-cooled
    • Number of cylinders and arrangement: 16-V
    • Bore and Stroke: 170 x 180 mm
    • Displacement: 65,37 L
    • Cooling System: Water
    • Lube Oil Specifications: API CD or CF SAE 30 or SAE 40
    • Compression Ratio: 13,5:1
    • Fuel Consumption ESP: 519,3 l/h
    • Fuel Consumption 100% PRP: 467,49 l/h
    • Fuel Consumption 75 % PRP: 357,36 l/h
    • Fuel Consumption 50 % PRP: 251,73 l/h
    • Fuel Consumption 25 % PRP: 147,96 l/h
    • Lube oil consumption with full load: 0,8
    • Total oil capacity including tubes, filters 230 L
    • Total coolant capacity: 400 L
    • Governor Type Electrical
    • Air Filter Type Dry
    • Inner diameter exhaust pipe: 340 mm
    • Oil temperature sensor
    • Low coolant level sensor
    • Exhaust gas compensator
    • Diesel engine
    • 4-stroke cycle
    • Water-cooled
    • 24V electrical system
    • Standard air filter
    • Standard fuel filter
    • Standard oil filter
    • Radiator with pusher fan
    • HTW sender
    • LOP sender
    • Electronic governor
    • Hot parts protection
    • Moving parts protection
    • Generator: STAMFORD
    • Model: HV804R
    • Poles: 4
    • Connection type (standard): Star
    • Mounting type: N/A
    • Insulation: F class
    • Enclosure (according IEC-34-5): IP23
    • Exciter system: Self-excited, brushless
    • Voltage regulator: A.V.R. (Electronic)
    • Bracket type: Double drive-shaft
    • Coupling system: Elastic Coupling
    • Coating type: Standard (Vacuum impregnation)
    • - OPEN SET VERSION.
    • Steel chassis
    • Emergency stop button
    • Oil sump extraction kit
    • Anti-vibration shock absorbers
    • Chassis with integrated fuel tank
    • Fuel level gauge
    • Fuel tank drain plug
    • Fuel transfer pump (Optional)
    • Steel industrial silencer -15db(A) attenuation (Optional)
    • Steel residential silencer -35db(A) attenuation. (Optional)
    • - ELECTRICAL SYSTEM.
    • Maintenance-free and anti-explosion battery
    • Battery Switch
    • Medium voltage cubicle separated with overcurrent protections and measurement transformers
    • Battery charger
    • Water Jacket Heater
    • Control panel and emergency stop button
    • Battery charger alternator with ground connection
    • Starter battery/ies installed (cables and bracket included)
    • Ground connection electrical installation with connection ready for ground spike (not supplied)
    • - EXHAUST SYSTEM.
    • Maximum exhaust temperature: 560 ºC
    • Exhaust Gas Flow: 482 m3/min
    • Maximum allowed back pressure: 600 mm H2o
    • Heat dissipated by exhaust pipe: 691,07 KCal/Kwh
    • - NECESSARY AMOUNT OF AIR.
    • Intake air flow: 10800 m3/h
    • Cooling Air Flow: 41,66 m3/s
    • Alternator fan air flow: 3,5 m3/s
    • - STARTING SYSTEM.
    • Starting power: 7,5 x 2 kW
    • Starting power: 10,2 x 2 CV
    • Recommended battery: 400 Ah
    • Auxiliary Voltage: 24 Vdc
    • Starter current peak: 1250 A
    • Nominal starter current: 400 A
    • - FUEL SYSTEM
    • Fuel Oil Specifications: Diesel
    • Maximum power suction pump: 75 mm Hg
    • Maximum return feed pump: 150 mm Hg

    Dimensions

    Dimensions
    Length (A)00.00
    Width (B)00.00
    Height (C)00.00

    Weight

    Weight

    Weight with fluids in radiator and crankcase

    0

    0

    Request a Quote

    Request a Quote

    By filling in this form you consent to have your information processed and recorded on our system and for the management of your relationship as a user, client, or candidate for employment Himoinsa.com.
    /privacy-policy/eng.html

     privacy policy *
    * Required fields
     

    Necessary

    Technical cookies are strictly necessary for our website to function and to be able to navigate through it. These types of cookies are those that, for example, allow us to identify you, give you access to certain restricted parts of the page if necessary, or remember different options or services already selected by you, such as your privacy preferences. Therefore, they are activated by default, your authorization is not required in this regard.

    Statistics

    The analysis cookies allow us to study the navigation of the users of our website in general (for example, which sections of the page are the most visited, which services are used the most and if they work correctly, etc.). Based on the statistical information on navigation on our website, we can improve both the operation of the page itself and the different services it offers. Therefore, these cookies do not have an advertising purpose, but only serve to make our website work better, adapting to our users in general. By activating them you will contribute to this continuous improvement.

    Marketing

    Marketing cookies are used to track visitors on web pages. The intention is to show ads relevant and attractive to the individual user, and therefore more valuable to publishers and third-party advertisers.