HTW-1030 T5

 

HTW-1030 T5

1065 kVA Generator set Open Skid

Powered by: MITSUBISHI
Alternator: STAMFORD

 

Three phase | 50 Hz | Diesel |

 

 

  • Engine Specifications 1.500 r.p.m.
  • Rated Output: 890kW prp ; 980kW standby
  • Manufacturer: MITSUBISHI
  • Model: S12H PTA
  • Engine Type: 4-stroke diesel
  • Injection Type: Direct
  • Aspiration Type: Turbocharged and after-cooled
  • Number of cylinders and arrangement: 12V
  • Bore and Stroke: 150 x 175 mm
  • Displacement: 37,11 L
  • Cooling System: Water
  • Lube Oil Specifications: API CD or CF SAE 30 or SAE 40
  • Compression Ratio: 14,0:1
  • Fuel Consumption ESP: 237,11 l/h
  • Fuel Consumption 100% PRP: 216,75 l/h
  • Fuel Consumption 75 % PRP: 166,78 l/h
  • Fuel Consumption 50 % PRP: 117,52 l/h
  • Fuel Consumption 25 % PRP: 68,61 l/h
  • Lube oil consumption with full load: 0,8
  • Total oil capacity including tubes, filters 200 L
  • Total coolant capacity: 244 L
  • Governor Type Electrical
  • Air Filter Type Dry
  • Inner diameter exhaust pipe: 212 mm
  • Oil temperature sensor
  • Low coolant level sensor
  • Exhaust gas compensator
  • Diesel engine
  • 4-stroke cycle
  • Water-cooled
  • 24V electrical system
  • Standard air filter
  • Standard fuel filter
  • Standard oil filter
  • Radiator with pusher fan
  • HTW sender
  • LOP sender
  • Electronic governor
  • Hot parts protection
  • Moving parts protection
  • Self-excited and self-regulated
  • IP23 protection
  • F class insulation
  • Maintenance-free and anti-explosion battery
  • Battery Switch
  • Medium voltage cubicle separated with overcurrent protections and measurement transformers
  • Battery charger
  • Water Jacket Heater
  • Control panel and emergency stop button
  • Battery charger alternator with ground connection
  • Starter battery/ies installed (cables and bracket included)
  • Ground connection electrical installation with connection ready for ground spike (not supplied)
  • Steel chassis
  • Emergency stop button
  • Oil sump extraction kit
  • Anti-vibration shock absorbers
  • Chassis with integrated fuel tank
  • Fuel level gauge
  • Fuel tank drain plug
  • Fuel transfer pump (opcional)
  • Steel industrial silencer -15db(A) attenuation (opcional)
  • Steel residential silencer -35db(A) attenuation. (opcional)
  • Generator
  • Poles: 4
  • Connection type (standard): Star
  • Mounting type: N/A
  • Insulation: F class
  • Enclosure (according IEC-34-5): IP23
  • Exciter system: Self-excited, brushless
  • Voltage regulator: A.V.R. (Electronic)
  • Bracket type: Double drive-shaft
  • Coupling system: Elastic Coupling
  • Coating type: Standard (Vacuum impregnation)
  • - Electrical system.
  • Maintenance-free and anti-explosion battery
  • Battery Switch
  • Medium voltage cubicle separated with overcurrent protections and measurement transformers
  • Battery charger
  • Water Jacket Heater
  • Control panel and emergency stop button
  • Battery charger alternator with ground connection
  • Starter battery/ies installed (cables and bracket included)
  • Ground connection electrical installation with connection ready for ground spike (not supplied)
  • - Open set version.
  • Steel chassis
  • Emergency stop button
  • Oil sump extraction kit
  • Anti-vibration shock absorbers
  • Chassis with integrated fuel tank
  • Fuel level gauge
  • Fuel tank drain plug
  • Fuel transfer pump Optional
  • Steel industrial silencer -15db(A) attenuation Optional
  • Steel residential silencer -35db(A) attenuation. Optional
  • - EXHAUST SYSTEM.
  • Maximum exhaust temperature: 515 ºC
  • Exhaust Gas Flow: 220 m3/min
  • Maximum allowed back pressure: 600 mm H2o
  • Heat dissipated by exhaust pipe: 616,71 KCal/Kwh
  • - NECESSARY AMOUNT OF AIR.
  • Intake air flow: 4980 m3/h
  • Cooling Air Flow: 30 m3/s
  • Alternator fan air flow: 3 m3/s
  • - STARTING SYSTEM.
  • Starting power: 7,5 x 2 kW
  • Starting power: 10,2 x 2 CV
  • Recommended battery: 300 Ah
  • Auxiliary Voltage: 24 Vdc
  • Starter current peak: 720 A
  • Nominal starter current: 380 A
  • - FUEL SYSTEM
  • Fuel Oil Specifications: Diesel
  • Maximum power suction pump: 75 mm Hg
  • Maximum return feed pump: 220 mm Hg
Fuel Feeding System
Manual fuel transfer pump
Electric fuel transfer pump SC / M6
Electric fuel transfer pump
Deepsea Optionals
DSE2133: RTD/THERMOCOUPLE Input Expansion Module
DSE2130:Input Expansion Module
DSE2157:Output Expansion Module
DSE2548:Led Output Expansion Module
DSE2152: Analog Outputs Module
DSE2131:Digital / Resistive inputs module
DSE890
CC2
CC2 30A
CC2 40A
CC2 50A
CC2 63A
CC2 100A
CC2 125A
CC2 160A
Deepsea
Change of CEx for DSE7320 controller

Power


kVA

1065
 
1173
Prime power  (670 - 2555)
Stand by  (735 - 2816)

kW

852
 
938
Prime power  (536 - 2044)
Stand by  (588 - 2253)
 

Sound level

 dB
 Distance (m)

 
 

dimensions


 
dimensions
Long (A)
0
Width (B)
0
High (C)
0
 

Weight


 
Weight
Weight with liquid in radiator and carter

0
 

Fuel capacity