HTW-1550 T5

 

HTW-1550 T5

1549 kVA Generator set Open Skid

Powered by: MITSUBISHI
Alternator: STAMFORD

 

Three phase | 50 Hz | Diesel |

 

 

  • Engine Specifications 1.500 r.p.m.
  • Rated Output: 1299kW prp ; 1432kW standby
  • Manufacturer: MITSUBISHI
  • Model: S12R F1PTAW2
  • Engine Type: 4-stroke diesel
  • Injection Type: Direct
  • Aspiration Type: Turbocharged and after-cooled
  • Number of cylinders and arrangement: 12 - V
  • Bore and Stroke: 170 x 180 mm
  • Displacement: 49,03 L
  • Cooling System: Water
  • Lube Oil Specifications: API CD or CF SAE 30 or SAE 40
  • Compression Ratio: 14,5:1
  • Fuel Consumption ESP: 358,7 l/h
  • Fuel Consumption 100% PRP: 323 l/h
  • Fuel Consumption 75 % PRP: 237,6 l/h
  • Fuel Consumption 50 % PRP: 163 l/h
  • Fuel Consumption 25 % PRP: 89 l/h
  • Total oil capacity including tubes, filters 180 L
  • Total coolant capacity: 532 L
  • Governor Type Electrical
  • Air Filter Type Dry
  • Oil temperature sensor
  • Low coolant level sensor
  • Exhaust gas compensator
  • Diesel engine
  • 4-stroke cycle
  • Water-cooled
  • 24V electrical system
  • Standard air filter
  • Standard fuel filter
  • Standard oil filter
  • Radiator with pusher fan
  • HTW sender
  • LOP sender
  • Electronic governor
  • Hot parts protection
  • Moving parts protection
  • Self-excited and self-regulated
  • IP23 protection
  • H class insulation
  • Electric control and power panel with measurements devices and control unit (according to necessity and configuration)
  • 4-pole thermal magnetic circuit breaker
  • Connection panel wired to the safety protection (open thermal magnetic protection and alarm)
  • Maintenance-free and anti-explosion battery
  • Battery Switch
  • Battery charger (standard on gensets with automatic control panels)
  • Heating resistor (standard on sets with automatic control panels)
  • Battery charger alternator with ground connection
  • Starter battery/ies installed (cables and bracket included)
  • Ground connection electrical installation with connection ready for ground spike (not supplied)
  • Steel chassis
  • Emergency stop button
  • Oil sump extraction kit
  • Anti-vibration shock absorbers
  • Chassis with integrated fuel tank
  • Fuel level gauge
  • Fuel tank drain plug
  • Fuel transfer pump (opcional)
  • Steel industrial silencer -15db(A) attenuation (opcional)
  • Steel residential silencer -35db(A) attenuation. (opcional)
  • Generator
  • Poles: 4
  • Connection type (standard): Star
  • Mounting type: S-00 21"
  • Insulation: H class
  • Enclosure (according IEC-34-5): IP23
  • Exciter system: Self-excited, brushless
  • Voltage regulator: A.V.R. (Electronic)
  • Bracket type: Single bearing
  • Coupling system: Flexible disc
  • Coating type: Standard (Vacuum impregnation)
  • - Electrical system.
  • Electric control and power panel with measurements devices and control unit (according to necessity and configuration)
  • 4-pole thermal magnetic circuit breaker
  • Connection panel wired to the safety protection (open thermal magnetic protection and alarm)
  • Maintenance-free and anti-explosion battery
  • Battery Switch
  • Battery charger (standard on gensets with automatic control panels)
  • Heating resistor (standard on sets with automatic control panels)
  • Battery charger alternator with ground connection
  • Starter battery/ies installed (cables and bracket included)
  • Ground connection electrical installation with connection ready for ground spike (not supplied)
  • - Open set version.
  • Steel chassis
  • Oil sump extraction kit
  • Emergency stop button
  • Anti-vibration shock absorbers
  • Chassis with integrated fuel tank
  • Fuel level gauge
  • Fuel tank drain plug
  • Fuel transfer pump Optional
  • Steel industrial silencer -15db(A) attenuation Optional
  • Steel residential silencer -35db(A) attenuation. Optional
  • - EXHAUST SYSTEM.
  • Maximum exhaust temperature: 500 ºC
  • Exhaust Gas Flow: 346 m3/min
  • Maximum allowed back pressure: 600 mm H2o
  • - NECESSARY AMOUNT OF AIR.
  • Intake air flow: 7860 m3/h
  • Cooling Air Flow: 24,6 m3/s
  • Alternator fan air flow: 2,69 m3/s
  • - STARTING SYSTEM.
  • Starting power: 7,5 x 2 kW
  • Starting power: 10,2 x 2 CV
  • Recommended battery: 300 Ah
  • Auxiliary Voltage: 24 Vdc
  • - FUEL SYSTEM
  • Fuel Oil Specifications: Diesel
  • Maximum power suction pump: 75 mm Hg
  • Maximum return feed pump: 150 mm Hg
  • Fuel Tank: 400 L
  • - Dimensions.
  • Length: 5.086.000 mm
  • Height: 2.796.000 mm
  • Width: 2.330.000 mm
  • Maximum shipping volume: 33133662480 m3
  • Weight with liquids in radiator and sump: 12.120 kg
  • Fuel tank capacity: 400 L
  • Autonomy: 2 Hours
Fuel Feeding System
Manual fuel transfer pump
Electric fuel transfer pump SC / M6
Electric fuel transfer pump
Residential Silencer
Residential Silencer T1550
Industrial Silencer
Industrial Silencer T1550
Protections
Earth Leakage Protection to 630A from 800A to 3200A
CEx Optionals
Telesignal
Kit CAN / LAN
Change over power source unit AC5 / CC2
Repetitive display: Remote Screen
Alarm Indicator Panel RAM7
Kit CAN/RS-485
Kit CAN/USB
Kit MODBUS TCP/IP
Kit CAN Profibus
Kit CAN/SNMP
Fleet Manager Module - C2CLOUD
C2CLOUD - 3G/GRPS and GPS
Kit CAN/LAN HG
Deepsea Optionals
DSE2133: RTD/THERMOCOUPLE Input Expansion Module
DSE2130:Input Expansion Module
DSE2157:Output Expansion Module
DSE2548:Led Output Expansion Module
DSE2152: Analog Outputs Module
DSE2131:Digital / Resistive inputs module
DSE890
Thermal Magnetic Protection
Change from 4P to 3P for 2500A
Motorized circuit breaker 2500A
Motorized circuit breaker 4000A
Deepsea
Change of CEx for DSE7310
Change of CEx for DSE7320 controller

Power


kVA

1549
 
1660
Prime power  (670 - 2555)
Stand by  (735 - 2816)

kW

1239
 
1328
Prime power  (536 - 2044)
Stand by  (588 - 2253)
 

dimensions


 
dimensions
Long (A)
508.600
Width (B)
233.000
High (C)
279.600
 

Weight


 
Weight
Weight with liquid in radiator and carter

12.120
 

Fuel capacity


 
 
400