HMW-1205 T6

 

HMW-1205 T6

1377 kVA Generator set Open Skid

Powered by: MTU
Alternator: MECC ALTE

 

Three phase | 60 Hz | Diesel |

 

 

  • Engine Specifications 1.800 r.p.m.
  • Rated Output: 1143kW prp ; 1262kW standby
  • Manufacturer: MTU
  • Model: 18V2000G85
  • Engine Type: 4-stroke diesel
  • Injection Type: Direct
  • Aspiration Type: Turbocharged and after-cooled
  • Number of cylinders and arrangement: 18V
  • Bore and Stroke: 130 x 150 mm
  • Displacement: 35,82 L
  • Cooling System: Coolant
  • Lube Oil Specifications: S10 W40
  • Compression Ratio: 16
  • Fuel Consumption ESP: 309,22 l/h
  • Fuel Consumption 100% PRP: 281,13 l/h
  • Fuel Consumption 75 % PRP: 217,08 l/h
  • Fuel Consumption 50 % PRP: 147,49 l/h
  • Fuel Consumption 25 % PRP: 79,63 l/h
  • Lube oil consumption with full load: 1 % of fuel consumption
  • Total oil capacity including tubes, filters 130 L
  • Total coolant capacity: 216 L
  • Governor Type Electrical
  • Air Filter Type Dry
  • Inner diameter exhaust pipe: 140,5 mm
  • Electronic management (ADEC)
  • Low coolant level sensor
  • Exhaust gas compensator
  • Diesel engine
  • 4-stroke cycle
  • Water-cooled
  • 24V electrical system
  • Standard air filter
  • Standard fuel filter
  • Standard oil filter
  • Radiator with pusher fan
  • HTW sender
  • LOP sender
  • Hot parts protection
  • Moving parts protection
  • Self-excited and self-regulated
  • 4 poles
  • AVR governor
  • IP23 protection
  • H class insulation
  • Electric control and power panel with measurements devices and control unit (according to necessity and configuration)
  • 3-pole thermal magnetic circuit breaker
  • Connection panel wired to the safety protection (open thermal magnetic protection and alarm)
  • Maintenance-free and anti-explosion battery
  • Battery Switch
  • Battery charger (standard on gensets with automatic control panels)
  • Water Jacket Heater with single phase pump
  • Battery charger alternator with ground connection
  • Starter battery/ies installed (cables and bracket included)
  • Ground connection electrical installation with connection ready for ground spike (not supplied)
  • Steel chassis
  • Oil sump extraction kit
  • Emergency stop button
  • Anti-vibration shock absorbers
  • Chassis with integrated fuel tank
  • Fuel level gauge
  • Fuel tank drain plug
  • Generator
  • Poles: 4
  • Connection type (standard): Star - Parallel
  • Mounting type: S-0 18''
  • Insulation: H class
  • Enclosure (according IEC-34-5): IP23
  • Exciter system: Self-excited, brushless
  • Voltage regulator: A.V.R. (Electronic)
  • Bracket type: Single bearing
  • Coupling system: Flexible disc
  • Coating type: Standard (Vacuum impregnation)
  • - Electrical system.
  • Electric control and power panel with measurements devices and control unit (according to necessity and configuration)
  • Connection panel wired to the safety protection (open thermal magnetic protection and alarm)
  • Maintenance-free and anti-explosion battery
  • Battery Switch
  • 3-pole thermal magnetic circuit breaker
  • Battery charger (standard on gensets with automatic control panels)
  • Water Jacket Heater with single phase pump
  • Battery charger alternator with ground connection
  • Starter battery/ies installed (cables and bracket included)
  • Ground connection electrical installation with connection ready for ground spike (not supplied)
  • - Open set version.
  • Steel chassis
  • Oil sump extraction kit
  • Emergency stop button
  • Anti-vibration shock absorbers
  • Chassis with integrated fuel tank
  • Fuel level gauge
  • Fuel tank drain plug
  • - EXHAUST SYSTEM.
  • Maximum exhaust temperature: 510 ºC
  • Exhaust Gas Flow: 240 m3/min
  • Maximum allowed back pressure: 85 mbar
  • - NECESSARY AMOUNT OF AIR.
  • Intake air flow: 6120 m3/h
  • Cooling Air Flow: 23,2 m3/s
  • Alternator fan air flow: 1,8 m3/s
  • - STARTING SYSTEM.
  • Starting power: 9,5 kW
  • Starting power: 12,92 CV
  • Recommended battery: 260 Ah
  • Auxiliary Voltage: 24 Vdc
  • Starter current peak: 1600 A
  • Nominal starter current: 800 A
  • - FUEL SYSTEM
  • Fuel Oil Specifications: Diesel
  • Fuel Tank: 980 L
  • - Dimensions.
  • Length: 5.050 mm
  • Height: 2.650 mm
  • Width: 1.910 mm
  • Maximum shipping volume: 25,56 m3
  • Weight with liquids in radiator and sump: 8.474 kg
  • Dry weight: 8.200 kg
  • Fuel tank capacity: 980 L
  • Autonomy: 5 Hours
Engine
Oil sump extraction kit 70
Electrical Equipment
Water Jacket heater M2200
Fuel Feeding System
Manual fuel transfer pump
Electric fuel transfer pump SC / M6
Electric fuel transfer pump
Residential Silencer
Residential Silencer M1270
Industrial Silencer
Industrial Silencer M1375
Protections
Earth Leakage Protection to 630A from 800A to 3200A
CEx Optionals
Telesignal
Kit CAN / LAN
Change over power source unit AC5 / CC2
Repetitive display: Remote Screen
Alarm Indicator Panel RAM7
Kit CAN/RS-485
Kit CAN/USB
Kit MODBUS TCP/IP
Kit CAN Profibus
Kit CAN/SNMP
Fleet Manager Module - C2CLOUD
C2CLOUD - 3G/GRPS and GPS
Kit CAN/LAN HG
Deepsea Optionals
DSE2133: RTD/THERMOCOUPLE Input Expansion Module
DSE2130:Input Expansion Module
DSE2157:Output Expansion Module
DSE2548:Led Output Expansion Module
DSE2152: Analog Outputs Module
DSE2131:Digital / Resistive inputs module
DSE890
CC2
CC2 1600A
CC2 2000A
CC2 2500A
Thermal Magnetic Protection
Change from 3P to 4P for 1600A
Change from 3P to 4P for 2000A
Change from 3P to 4P for 2500A
Extra to change to motorized circuit breaker 1600A
Extra to change to motorized circuit breaker 2500A
Extra to change to motorized circuit breaker 2000A
Deepsea
Change of CEx for DSE7310
Change of CEx for DSE7320 controller

Power


kVA

1377
 
1518
Prime power  (457 - 2572)
Stand by  (504 - 2809)

kW

1102
 
1214
Prime power  (365 - 2058)
Stand by  (403 - 2247)
 

Sound level

 dB
 Distance (m)

 
 

dimensions


 
dimensions
Long (A)
505
Width (B)
191
High (C)
265
 

Weight


 
Weight
Weight with liquid in radiator and carter

8.474
 

Fuel capacity


 
 
980