HFW-200 T5

 

HFW-200 T5

200 kVA Generator set Soundproof

Powered by: FPT_IVECO
Alternator: MECC ALTE

 

Three phase | 50 Hz | Diesel | Stage 2

 

 

  • Engine Specifications 1.500 r.p.m.
  • Rated Output: 175kW prp ; 193kW standby
  • Manufacturer: FPT_IVECO
  • Model: NEF67TE2A
  • Engine Type: 4-stroke diesel
  • Injection Type: Direct, common rail
  • Aspiration Type: Turbocharged and after-cooled
  • Number of cylinders and arrangement: 6 - L
  • Bore and Stroke: 104 x 132 mm
  • Displacement: 6,7 L
  • Cooling System: Liquid (water + 50% glycol)
  • Lube Oil Specifications: ACEA E3 - E5
  • Compression Ratio: 17,5 : 1
  • Fuel Consumption ESP: 48 l/h
  • Fuel Consumption 100% PRP: 44 l/h
  • Fuel Consumption 80 % PRP: 35,7 l/h
  • Fuel Consumption 50 % PRP: 25,6 l/h
  • Lube oil consumption with full load: 0,5 % of fuel consumption
  • Total oil capacity including tubes, filters 17 L
  • Total coolant capacity: 25,5 L
  • Governor Type Electrical
  • Air Filter Type Dry
  • Inner diameter exhaust pipe: 70 mm
  • Diesel engine
  • 4-stroke cycle
  • Water-cooled
  • 12V electrical system
  • Water separator filter (no visible level)
  • Dry air filter
  • Radiator with blower fan
  • HTW sender
  • LOP sender
  • Radiator water level sensor
  • Electronic governor
  • Hot parts protection
  • Moving parts protection
  • Self-excited and self-regulated
  • 4 poles
  • AVR governor
  • IP23 protection
  • H class insulation
  • Single drive-shaft
  • Flexible disc coupling
  • Electric control and power panel with measurements devices and control unit (according to necessity and configuration)
  • 4-pole thermal magnetic circuit breaker
  • Battery isolator
  • Adjustable earth leakage protection (time & sensitivity) standard in M5 and AS5, with thermal magnetic protection
  • Battery charger (standard on gensets with automatic control panels)
  • Heating resistor (standard on sets with automatic control panels)
  • Battery charger alternator with ground connection
  • Starter battery/ies installed (cables and bracket included)
  • Ground connection electrical installation with connection ready for ground spike (not supplied)
  • Steel chassis
  • Anti-vibration shock absorbers
  • Fuel tank
  • Fuel level gauge
  • Emergency stop button
  • Bodywork made from high quality steel plate
  • High mechanical strength
  • Low level of noise emissions
  • Soundproofing provided by high-density volcanic rock wool
  • Epoxy polyester powder coating
  • Full access for maintenance (water, oil and filters, no need to remove the bonnet)
  • Reinforced lifting hooks for crane hoisting
  • Watertight chassis (acts as a double barrier against liquid retention)
  • Fuel tank drain plug
  • Chassis drain plug
  • Chassis ready for future mobile kit installation
  • Steel residential silencer -35db(A) attenuation.
  • Oil sump extraction kit
  • Versatility to assemble a high capacity chassis with a metallic fuel tank
  • IP Protection according to ISO 8528-13:2016
  • 3 way valve for external fuel supply (available in 1/2" and 3/8" fittings) (opcional)
  • Fuel transfer pump (opcional)
  • Generator
  • Poles: 4
  • Connection type (standard): Star-series
  • Mounting type: S-3 11"1/2
  • Insulation: H class
  • Enclosure (according IEC-34-5): IP23
  • Exciter system: Self-excited, brushless
  • Voltage regulator: A.V.R. (Electronic)
  • Bracket type: Single bearing
  • Coupling system: Flexible disc
  • Coating type: Standard (Vacuum impregnation)
  • - Electrical system.
  • Electric control and power panel with measurements devices and control unit (according to necessity and configuration)
  • 4-pole thermal magnetic circuit breaker
  • Battery isolator
  • Adjustable earth leakage protection (time & sensitivity) standard in M5 and AS5, with thermal magnetic protection
  • Battery charger (standard on gensets with automatic control panels)
  • Heating resistor (standard on sets with automatic control panels)
  • Battery charger alternator with ground connection
  • Starter battery/ies installed (cables and bracket included)
  • Ground connection electrical installation with connection ready for ground spike (not supplied)
  • - Soundproofed version.
  • Steel chassis
  • Anti-vibration shock absorbers
  • Fuel tank
  • Fuel level gauge
  • Emergency stop button
  • Bodywork made from high quality steel plate
  • High mechanical strength
  • Low level of noise emissions
  • Soundproofing provided by high-density volcanic rock wool
  • Epoxy polyester powder coating
  • Full access for maintenance (water, oil and filters, no need to remove the bonnet)
  • Reinforced lifting hooks for crane hoisting
  • Watertight chassis (acts as a double barrier against liquid retention)
  • Fuel tank drain plug
  • Chassis drain plug
  • Chassis ready for future mobile kit installation
  • Steel residential silencer -35db(A) attenuation.
  • Oil sump extraction kit
  • Versatility to assemble a high capacity chassis with a metallic fuel tank
  • IP Protection according to ISO 8528-13:2016
  • 3 way valve for external fuel supply (available in 1/2" and 3/8" fittings) Optional
  • Fuel transfer pump Optional
  • - EXHAUST SYSTEM.
  • Maximum exhaust temperature: 550 ºC
  • Exhaust Gas Flow: 0,262 kg/s
  • Maximum allowed back pressure: 6 kPa
  • Exhaust Flange Size (external diameter): 120 mm
  • Heat dissipated by exhaust pipe: 614 KCal/Kwh
  • - NECESSARY AMOUNT OF AIR.
  • Intake air flow: 754 m3/h
  • Cooling Air Flow: 3,8 m3/s
  • Alternator fan air flow: 0,514 m3/s
  • - STARTING SYSTEM.
  • Starting power: 3 kW
  • Starting power: 4,08 CV
  • Recommended battery: 185 Ah
  • Auxiliary Voltage: 12 Vdc
  • - FUEL SYSTEM
  • Fuel Oil Specifications: Diesel
  • Fuel Tank: 450 L
  • Other fuel tank capacities: 600, 1.100 L
  • - Dimensions.
  • Length: 3.300 mm
  • Height: 1.956 mm
  • Width: 1.200 mm
  • Maximum shipping volume: 7,75 m3
  • Weight with liquids in radiator and sump: 2.327 kg
  • Fuel tank capacity: 450 L
  • Autonomy: 13 Hours
  • Sound pressure level: 68 dB(A)@7m
Electrical Equipment
Water jacket heater F200
Fuel Feeding System
3 Way valve fuel filling
Decanter filter FHD200
Decanter filter FHD200 - With alarm
Electric fuel transfer pump SC / M6
Electric fuel transfer pump
Socket Boxes
CBR25 M5 Socket boxes
CBR25 AS5 Socket boxes
Trailers
High speed trailer set E10 2 axle – articulated draw bar
Low speed trailer set E10. 1 axle with brake
Low speed trailer set E10. 2 axle with brake
High speed trailer set E10 - 2 axe - V shaped draw bar
High Capacity Fuel Tank
High Capacity fuel tank 600L-E10
High Capacity fuel tank - 1100L - E10
Protections
Earth Leakage Protection to 630A
CEx Optionals
Telesignal
Kit CAN / LAN
Change over power source unit AC5 / CC2
Repetitive display: Remote Screen
Alarm Indicator Panel RAM7
Kit CAN/RS-485
Kit CAN/USB
Kit MODBUS TCP/IP
Kit CAN Profibus
Kit CAN/SNMP
Fleet Manager Module - C2CLOUD
C2CLOUD - 3G/GRPS and GPS
Kit CAN/LAN HG
Deepsea Optionals
DSE2133: RTD/THERMOCOUPLE Input Expansion Module
DSE2130:Input Expansion Module
DSE2157:Output Expansion Module
DSE2548:Led Output Expansion Module
DSE2152: Analog Outputs Module
DSE2131:Digital / Resistive inputs module
DSE890
Thermal Magnetic Protection
Change from 4P to 3P for 400A
Change from 4P to 3P for 630A
Motorized circuit breaker 400A
Motorized circuit breaker 630A
Deepsea
Change of CEx for DSE7310
Change of CEx for DSE7320 controller

Power


kVA

200
 
220
Prime power  (26 - 625)
Stand by  (29 - 690)

kW

160
 
176
Prime power  (24 - 500)
Stand by  (26 - 552)
 

Sound level

 dB
 Distance (m)

 
 

dimensions


 
dimensions
Long (A)
330
Width (B)
120
High (C)
195,60
 

Weight


 
Weight
Weight with liquid in radiator and carter

2.327
 

Fuel capacity


 
 
450
 

dimensions


 
dimensions
Long (A)
330
Width (B)
120
High (C)
195,60
 

Weight


 
Weight
Weight with liquid in radiator and carter

2.418
 

Fuel capacity


 
 
600
 

dimensions


 
dimensions
Long (A)
330
Width (B)
120
High (C)
217,90
 

Weight


 
Weight
Weight with liquid in radiator and carter

2.580
 

Fuel capacity


 
 
1.100