Region EUROPE
    Version
    Model: HRMW-460 T5 Rental H1R

    Model

    HRMW-460 T5

    HRMW-460 T5 | Three phase | Diesel | Rental

    Model

    Powered by MTU

    Alternator MECC ALTE

    Emissions STAGE 3A

    PRP
    ESP
    COP
    Power kVA
    460
    508
    Power kW
    368
    406
    Generator set data sheet
    • Engine Specifications 1.500 r.p.m.
    • Rated Engine Output: 392kW prp ; 433kW standby
    • Manufacturer: MTU
    • Model: 10V1600G10F
    • Engine Type: 4-stroke diesel
    • Injection Type: Direct
    • Aspiration Type: Turbocharged and after-cooled
    • Number of cylinders and arrangement: 10-V
    • Bore and Stroke: 122 x 150 mm
    • Displacement: 17,5 L
    • Cooling System: Coolant
    • Lube Oil Specifications: S10 W40
    • Compression Ratio: 17,5
    • Fuel Consumption ESP: 108,87 l/h
    • Fuel Consumption 100% PRP: 101,75 l/h
    • Fuel Consumption 75 % PRP: 80,22 l/h
    • Fuel Consumption 50 % PRP: 55,37 l/h
    • Fuel Consumption 25 % PRP: 29,11 l/h
    • Lube oil consumption with full load: 0,5 % of fuel consumption
    • Total oil capacity including tubes, filters 60,5 L
    • Total coolant capacity: 94 L
    • Governor Type Electrical
    • Air Filter Type Dry
    • Inner diameter exhaust pipe: 106 mm
    • Diesel engine
    • 4-stroke cycle
    • 24V electrical system
    • Water separator filter (visible level)
    • Dry air filter
    • Radiator with pusher fan
    • Radiator water level sensor
    • HTW sender
    • LOP sender
    • Electronic governor
    • Hot parts protection
    • Moving parts protection
    • Generator: MECC ALTE
    • Model: ECO40 3S/4 B
    • Poles: 4
    • Connection type (standard): Star - Parallel
    • Mounting type: S-1 14"
    • Insulation: H class
    • Enclosure (according IEC-34-5): IP23
    • Exciter system: Self-excited, brushless
    • Voltage regulator: A.V.R. (Electronic)
    • Bracket type: Single bearing
    • Coupling system: Flexible disc
    • Coating type: Standard (Vacuum impregnation)
    • - SOUNDPROOFED VERSION.
    • Steel chassis
    • Anti-leakage chassis, predisposed to retain liquids (retention tray)
    • High capacity fuel tank, with contention base and easy external filling
    • Manhole for fuel tank cleaning and drainage
    • Manhole for chassis cleaning
    • Oversized chassis to protect the bodywork
    • Slide carriage and brackets for transportation with forklift
    • Tilting cap in the exhaust
    • Manhole to fill the radiator
    • Pre-installation or niche to house the quick connection hydraulic fittings for fuel transfer
    • Anti-vibration shock absorbers
    • Chassis with integrated fuel tank
    • Fuel level gauge
    • Bodywork made from high quality steel plate
    • High mechanical strength
    • Low noise emissions level
    • Soundproofing provided by high-density volcanic rock wool
    • Epoxy polyester powder coating
    • Full access for maintenance (water, oil and filters, no need to remove the canopy)
    • Reinforced lifting hooks for crane hoisting
    • Steel residential silencer -35db(A) attenuation.
    • Oil sump extraction kit
    • External filling of the fuel tank with safety key
    • Emergency stop button (double emergency stop protection: Interior on the panel + Exterior on the bodywork)
    • Mechanized for power cable output
    • Door with window to visualize control panel, alarms and measurements
    • Pressure locks
    • IP Protection according to ISO 8528-13:2016
    • 3 way valve for external fuel supply (available in 1/2" and 3/8" fittings) (Optional)
    • Fuel transfer pump (Optional)
    • - ELECTRICAL SYSTEM.
    • M5 control panel with electronic CEM7 control unit and switched emergency stop
    • Power panel with built-in circuit breaker plates
    • Safety relay in output terminal board (thermal magnetic trip and alarm in control unit)
    • Battery Switch
    • Adjustable earth leakage protection (time & sensitivity) standard in M5 and AS5, with thermal magnetic protection
    • Battery charger alternator with ground connection
    • Starter battery/ies installed (cables and bracket included)
    • Ground connection electrical installation with connection ready for ground spike (not supplied)
    • - EXHAUST SYSTEM.
    • Maximum exhaust temperature: 500 ºC
    • Exhaust Gas Flow: 93,6 m3/min
    • Maximum allowed back pressure: 150 mbar
    • Exhaust Flange Size (external diameter): 160 mm
    • - NECESSARY AMOUNT OF AIR.
    • Intake air flow: 2052 m3/h
    • Cooling Air Flow: 10,9 m3/s
    • Alternator fan air flow: 0,9 m3/s
    • - STARTING SYSTEM.
    • Starting power: 8 kW
    • Starting power: 10,88 CV
    • Recommended battery: 75 x 2 Ah
    • Auxiliary Voltage: 24 Vdc
    • Starter current peak: 800 A
    • Nominal starter current: 250 A
    • - FUEL SYSTEM
    • Fuel Oil Specifications: Diesel
    • Fuel Tank: 2.000 L
    • - DIMENSIONS.
    • Length: 4.602 mm
    • Height: 2.809 mm
    • Width: 1.850 mm
    • Maximum shipping volume: 23,91 m3
    • Weight with liquids in radiator and sump: 6.495 kg
    • Fuel tank capacity: 2.000 L
    • Autonomy: 25 Hours
    • Sound pressure level: 69 ± 2,4 dB(A)@7m

    Dimensions

    Dimensions
    Length (A)460.2181.18
    Width (B)18572.83
    Height (C)280.9110.59

    Weight

    Weight

    Weight with fluids in radiator and crankcase

    6495

    14321.475

    Fuel capacity

    2000

    528

    Request a Quote

    Request a Quote

    By filling in this form you consent to have your information processed and recorded on our system and for the management of your relationship as a user, client, or candidate for employment Himoinsa.com.
    /privacy-policy/eng.html

     privacy policy *
    * Required fields
     

    Necessary

    Technical cookies are strictly necessary for our website to function and to be able to navigate through it. These types of cookies are those that, for example, allow us to identify you, give you access to certain restricted parts of the page if necessary, or remember different options or services already selected by you, such as your privacy preferences. Therefore, they are activated by default, your authorization is not required in this regard.

    Statistics

    The analysis cookies allow us to study the navigation of the users of our website in general (for example, which sections of the page are the most visited, which services are used the most and if they work correctly, etc.). Based on the statistical information on navigation on our website, we can improve both the operation of the page itself and the different services it offers. Therefore, these cookies do not have an advertising purpose, but only serve to make our website work better, adapting to our users in general. By activating them you will contribute to this continuous improvement.

    Marketing

    Marketing cookies are used to track visitors on web pages. The intention is to show ads relevant and attractive to the individual user, and therefore more valuable to publishers and third-party advertisers.