HBW-940 T5

 

HBW-940 T5

943 kVA Generator set Open Skid

Powered by: BAUDOUIN
Alternator: MECC ALTE

 

Three phase | 50 Hz | Diesel |

 

 

  • Engine Specifications 1.500 r.p.m.
  • Rated Output: 790kW prp ; 872kW standby
  • Manufacturer: BAUDOUIN
  • Model: 12M26G1000.5
  • Engine Type: 4-stroke diesel
  • Injection Type: Direct
  • Aspiration Type: Turbocharged and after-cooled
  • Bore and Stroke: 150 x 150 mm
  • Displacement: 31,8 L
  • Cooling System: Liquid (water + 50% glycol)
  • Lube Oil Specifications: API CF or CH4, SAE 15W-40
  • Compression Ratio: 15,7:1
  • Fuel Consumption ESP: 218,9 l/h
  • Fuel Consumption 100% PRP: 195,5 l/h
  • Fuel Consumption 75 % PRP: 146,5 l/h
  • Fuel Consumption 50 % PRP: 100,8 l/h
  • Fuel Consumption 25 % PRP: 57,1 l/h
  • Lube oil consumption with full load: 0,3 % of fuel consumption
  • Total oil capacity including tubes, filters 114 L
  • Total coolant capacity: 191 L
  • Governor Type Electrical
  • Air Filter Type Dry
  • Inner diameter exhaust pipe: 200 mm
  • Oil temperature sensor
  • Low coolant level sensor
  • Exhaust gas compensator
  • Diesel engine
  • 4-stroke cycle
  • Water-cooled
  • 24V electrical system
  • Standard air filter
  • Standard fuel filter
  • Standard oil filter
  • Radiator with pusher fan
  • HTW sender
  • LOP sender
  • Radiator water level sensor
  • Hot parts protection
  • Moving parts protection
  • Self-excited and self-regulated
  • 4 poles
  • AVR governor
  • IP23 protection
  • H class insulation
  • Electric control and power panel with measurements devices and control unit (according to necessity and configuration)
  • 4-pole thermal magnetic circuit breaker
  • Connection panel wired to the safety protection (open thermal magnetic protection and alarm)
  • Maintenance-free and anti-explosion battery
  • Battery Switch
  • Battery charger (standard on gensets with automatic control panels)
  • Heating resistor (standard on sets with automatic control panels)
  • Battery charger alternator with ground connection
  • Starter battery/ies installed (cables and bracket included)
  • Ground connection electrical installation with connection ready for ground spike (not supplied)
  • Steel chassis
  • Oil sump extraction kit
  • Emergency stop button
  • Anti-vibration shock absorbers
  • Chassis with integrated fuel tank
  • Fuel level gauge
  • Fuel tank drain plug
  • Fuel transfer pump (opcional)
  • Steel industrial silencer -15db(A) attenuation (opcional)
  • Steel residential silencer -35db(A) attenuation. (opcional)
  • Generator
  • Poles: 4
  • Connection type (standard): Star - Parallel
  • Mounting type: S-0 18''
  • Insulation: H class
  • Enclosure (according IEC-34-5): IP23
  • Exciter system: Self-excited, brushless
  • Voltage regulator: A.V.R. (Electronic)
  • Bracket type: Single bearing
  • Coupling system: Flexible disc
  • Coating type: Standard (Vacuum impregnation)
  • - Electrical system.
  • Electric control and power panel with measurements devices and control unit (according to necessity and configuration)
  • 4-pole thermal magnetic circuit breaker
  • Connection panel wired to the safety protection (open thermal magnetic protection and alarm)
  • Maintenance-free and anti-explosion battery
  • Battery Switch
  • Battery charger (standard on gensets with automatic control panels)
  • Heating resistor (standard on sets with automatic control panels)
  • Battery charger alternator with ground connection
  • Starter battery/ies installed (cables and bracket included)
  • Ground connection electrical installation with connection ready for ground spike (not supplied)
  • - Open set version.
  • Steel chassis
  • Oil sump extraction kit
  • Emergency stop button
  • Anti-vibration shock absorbers
  • Chassis with integrated fuel tank
  • Fuel level gauge
  • Fuel tank drain plug
  • Fuel transfer pump Optional
  • Steel industrial silencer -15db(A) attenuation Optional
  • Steel residential silencer -35db(A) attenuation. Optional
  • - EXHAUST SYSTEM.
  • Maximum exhaust temperature: 550 ºC
  • Exhaust Gas Flow: 229,5 m3/min
  • Maximum allowed back pressure: 75 mbar
  • - NECESSARY AMOUNT OF AIR.
  • Intake air flow: 4044 m3/h
  • Cooling Air Flow: 24,17 m3/s
  • Alternator fan air flow: 1,5 m3/s
  • - STARTING SYSTEM.
  • Starting power: 10 kW
  • Starting power: 13,6 CV
  • Recommended battery: 74 x 2 Ah
  • Auxiliary Voltage: 27 Vdc
  • - FUEL SYSTEM
  • Fuel Oil Specifications: Diesel
  • Maximum power suction pump: 375 mm Hg
  • Maximum return feed pump: 375 mm Hg
  • - Dimensions.
  • Length: 4.872 mm
  • Height: 2.460 mm
  • Width: 2.100 mm
  • Maximum shipping volume: 25,17 m3
  • Weight with liquids in radiator and sump: 8.077 kg
Fuel Feeding System
Manual fuel transfer pump
Electric fuel transfer pump SC / M6
Electric fuel transfer pump
Protections
Earth Leakage Protection to 630A from 800A to 3200A
CEx Optionals
Telesignal
Kit CAN / LAN
Change over power source unit AC5 / CC2
Repetitive display: Remote Screen
Alarm Indicator Panel RAM7
Kit CAN/RS-485
Kit CAN/USB
Kit MODBUS TCP/IP
Kit CAN Profibus
Kit CAN/SNMP
Fleet Manager Module - C2CLOUD
C2CLOUD - 3G/GRPS and GPS
Kit CAN/LAN HG
Deepsea Optionals
DSE2133: RTD/THERMOCOUPLE Input Expansion Module
DSE2130:Input Expansion Module
DSE2157:Output Expansion Module
DSE2548:Led Output Expansion Module
DSE2152: Analog Outputs Module
DSE2131:Digital / Resistive inputs module
DSE890
Thermal Magnetic Protection
Change from 4P to 3P for 1600A
Extra to change to motorized circuit breaker 1600A
Deepsea
Change of CEx for DSE7310
Change of CEx for DSE7320 controller

Power


kVA

943
 
1041
Prime power  (109 - 1259)
Stand by  (120 - 1539)

kW

755
 
833
Prime power  (87 - 1007)
Stand by  (96 - 1232)
 

Sound level

 dB
 Distance (m)

 
 

dimensions


 
dimensions
Long (A)
487,20
Width (B)
210
High (C)
246
 

Weight


 
Weight
Weight with liquid in radiator and carter

8.077
 

Fuel capacity