HBW-745 T5

 

HBW-745 T5

763 kVA Generator set Open Skid

Powered by: BAUDOUIN
Alternator: STAMFORD

 

Three phase | 50 Hz | Diesel |

 

 

  • Engine Specifications 1.500 r.p.m.
  • Rated Output: 646,5kW prp ; 695,5kW standby
  • Manufacturer: BAUDOUIN
  • Model: 6M33G825.5
  • Engine Type: 4-stroke diesel
  • Injection Type: Direct
  • Aspiration Type: Turbocharged and after-cooled
  • Bore and Stroke: 150 x 185 mm
  • Displacement: 19,6 L
  • Cooling System: Liquid (water + 50% glycol)
  • Lube Oil Specifications: API CF or CH4, SAE 15W-40
  • Compression Ratio: 15:1
  • Fuel Consumption ESP: 182,7 l/h
  • Fuel Consumption 100% PRP: 161,5 l/h
  • Fuel Consumption 75 % PRP: 116,4 l/h
  • Fuel Consumption 50 % PRP: 76,9 l/h
  • Fuel Consumption 25 % PRP: 42,4 l/h
  • Lube oil consumption with full load: 0,3 % of fuel consumption
  • Total oil capacity including tubes, filters 64 L
  • Total coolant capacity: 159 L
  • Governor Type Electrical
  • Air Filter Type Dry
  • Inner diameter exhaust pipe: 200 mm
  • Diesel engine
  • 4-stroke cycle
  • Water-cooled
  • 24V electrical system
  • Water separator filter (no visible level)
  • Dry air filter
  • Radiator with pusher fan
  • Radiator water level sensor
  • HTW sender
  • LOP sender
  • Electronic governor
  • Hot parts protection
  • Moving parts protection
  • - GENERATOR.
  • Poles: 4
  • Connection type (standard): Star-series
  • Mounting type: S-1 14"
  • Insulation: H class
  • Enclosure (according IEC-34-5): IP23
  • Exciter system: Self-excited, brushless
  • Voltage regulator: A.V.R. (Electronic)
  • Bracket type: Single bearing
  • Coupling system: Flexible disc
  • Coating type: Standard (Vacuum impregnation)
  • - OPEN SET VERSION.
  • Steel chassis
  • Emergency stop button
  • Anti-vibration shock absorbers
  • Chassis with integrated fuel tank
  • Fuel level gauge
  • Fuel tank drain plug
  • Steel industrial silencer -15db(A) attenuation
  • Fuel transfer pump (Optional)
  • Steel residential silencer -35db(A) attenuation. (Optional)
  • - ELECTRICAL SYSTEM.
  • Electric control and power panel with measurements devices and control unit (according to necessity and configuration)
  • Battery Switch
  • Adjustable earth leakage protection (time & sensitivity) standard in M5 and AS5, with thermal magnetic protection
  • 3-pole thermal magnetic circuit breaker
  • Battery charger (standard on gensets with automatic control panels)
  • Heating resistor (standard on sets with automatic control panels)
  • Battery charger alternator with ground connection
  • Starter battery/ies installed (cables and bracket included)
  • Ground connection electrical installation with connection ready for ground spike (not supplied)
  • - EXHAUST SYSTEM.
  • Maximum exhaust temperature: 550 ºC
  • Exhaust Gas Flow: 171,3 m3/min
  • Maximum allowed back pressure: 75 mbar
  • - NECESSARY AMOUNT OF AIR.
  • Intake air flow: 3090 m3/h
  • Cooling Air Flow: 13,75 m3/s
  • Alternator fan air flow: 1,614 m3/s
  • - STARTING SYSTEM.
  • Starting power: 8,5 kW
  • Starting power: 11,56 CV
  • Recommended battery: 75 x 2 Ah
  • Auxiliary Voltage: 24 Vdc
  • - FUEL SYSTEM
  • Fuel Oil Specifications: Diesel
  • Maximum power suction pump: 375 mm Hg
  • Maximum return feed pump: 375 mm Hg
  • Fuel Tank: 400 L
  • - DIMENSIONS.
  • Length: 3.930 mm
  • Height: 1.940 mm
  • Width: 1.910 mm
  • Maximum shipping volume: 14,56 m3
  • Weight with liquids in radiator and sump: 5.781 kg
  • Fuel tank capacity: 400 L
  • Autonomy: 3 Hours
Fuel Feeding System
Electric fuel transfer pump SC / M6
Electric fuel transfer pump
Protections
Earth Leakage Protection to 630A from 800A to 3200A
CEx Optionals
Telesignal
Kit CAN / LAN
Change over power source unit AC5 / CC2
Repetitive display: Remote Screen
Alarm Indicator Panel RAM7
Kit CAN/RS-485
Kit MODBUS TCP/IP
Kit CAN Profibus
Kit CAN/SNMP
Fleet Manager Module - C2CLOUD
C2CLOUD - 3G/GRPS and GPS
Kit CAN/LAN HG
Deepsea Options
DSE2133: RTD/THERMOCOUPLE Input Expansion Module
DSE2130:Input Expansion Module
DSE2157:Output Expansion Module
DSE2548:Led Output Expansion Module
DSE2152: Analog Outputs Module
DSE2131:Digital / Resistive inputs module
DSE890
Thermal Magnetic Protection
Change from 4P to 3P for 1250A
Extra to change to motorized circuit breaker 1250A
Deepsea
Change of CEx for DSE7310
Change of CEx for DSE7320 controller

Power


kVA

763
 
820
Prime power  (109 - 1397)
Stand by  (120 - 1539)

kW

610
 
656
Prime power  (87 - 1117)
Stand by  (96 - 1232)
 

Sound level

 dB
 Distance (m)

 
 

dimensions


 
dimensions
Long (A)
393
Width (B)
191
High (C)
194
 

Weight


 
Weight
Weight with liquid in radiator and carter

5.781
 

Fuel capacity


 
 
400