HGP-575 T5 NG

 

HGP-575 T5 NG

573 kVA Generator set Open Skid

Powered by: PSI
Alternator: STAMFORD

 

Three phase | 50 Hz | Natural Gas |

 

 

  • Engine Specifications 1.500 r.p.m.
  • Rated Output: 483kW prp ; 573kW standby
  • Manufacturer: PSI
  • Model: 31.8L
  • Engine Type: 4-stroke Otto Cycle
  • Injection Type: Carburization
  • Aspiration Type: Turbocharged and after-cooled
  • Bore and Stroke: 150 x 150 mm
  • Displacement: 31,8 L
  • Cooling System: Liquid (water + 50% glycol)
  • Lube Oil Specifications: API CD/≥CF, SAE 15W40
  • Compression Ratio: 10,5:1
  • Fuel Consumption ESP: 160,2 Nm3/h
  • Fuel Consumption 100% PRP: 137,3 Nm3/h
  • Fuel Consumption 75 % PRP: 107,2 Nm3/h
  • Fuel Consumption 50 % PRP: 80,7 Nm3/h
  • Fuel Consumption 25 % PRP: 49,4 Nm3/h
  • Total oil capacity: 112 L
  • Total coolant capacity: 176,2 L
  • Governor Type Electrical
  • Air Filter Type Dry
  • Natural Gas engine
  • 4-stroke cycle
  • Water-cooled
  • 24V electrical system
  • Dry air filter
  • Radiator with pusher fan
  • HTW sender
  • LOP sender
  • Electronic governor
  • Hot parts protection
  • Moving parts protection
  • Self-excited and self-regulated
  • 4 poles
  • IP23 protection
  • H class insulation
  • Electric control and power panel with measurements devices and control unit (according to necessity and configuration)
  • 3-pole thermal magnetic circuit breaker
  • Adjustable earth leakage protection (time & sensitivity) standard in M5 and AS5, with thermal magnetic protection
  • Battery charger (standard on gensets with automatic control panels)
  • Heating resistor (standard on sets with automatic control panels)
  • Battery charger alternator with ground connection
  • Starter battery/ies installed (cables and bracket included)
  • Ground connection electrical installation with connection ready for ground spike (not supplied)
  • Battery Switch (Optional)
  • Steel chassis
  • Emergency stop button
  • Anti-vibration shock absorbers
  • Steel industrial silencer -15db(A) attenuation
  • Steel residential silencer -35db(A) attenuation. (Optional)
  • Manual shut-off valve
  • Gas filter
  • Double solenoid valve
  • High pressure regulator
  • Primary pressure regulator
  • Low pressure switch
  • High pressure switch
  • Valve (tightness) testing system
  • Inlet pressure manometer
  • Outlet pressure manometer
  • Special Start/Stop sequence
  • Generator
  • Poles: 4
  • Connection type (standard): Star-series
  • Mounting type: S-0 18''
  • Insulation: H class
  • Enclosure (according IEC-34-5): IP23
  • Exciter system: Self-excited, brushless
  • Voltage regulator: A.V.R. (Electronic)
  • Bracket type: Single bearing
  • Coupling system: Flexible disc
  • Coating type: Standard (Vacuum impregnation)
  • - Electrical system.
  • Electric control and power panel with measurements devices and control unit (according to necessity and configuration)
  • 3-pole thermal magnetic circuit breaker
  • Adjustable earth leakage protection (time & sensitivity) standard in M5 and AS5, with thermal magnetic protection
  • Battery charger (standard on gensets with automatic control panels)
  • Heating resistor (standard on sets with automatic control panels)
  • Battery charger alternator with ground connection
  • Starter battery/ies installed (cables and bracket included)
  • Ground connection electrical installation with connection ready for ground spike (not supplied)
  • Battery Switch (Optional)
  • - Open set version.
  • Steel chassis
  • Emergency stop button
  • Anti-vibration shock absorbers
  • Steel industrial silencer -15db(A) attenuation
  • Steel residential silencer -35db(A) attenuation. (Optional)
  • - Gas ramp.
  • Manual shut-off valve
  • Gas filter
  • Double solenoid valve
  • High pressure regulator
  • Primary pressure regulator
  • Low pressure switch
  • High pressure switch
  • Valve (tightness) testing system
  • Inlet pressure manometer
  • Outlet pressure manometer
  • Special Start/Stop sequence
  • - EXHAUST SYSTEM.
  • Maximum exhaust temperature: 581 ºC
  • Exhaust Gas Flow: 90 m3/min
  • Maximum allowed back pressure: 10,2 kPa
  • - NECESSARY AMOUNT OF AIR.
  • Intake air flow: 1680 m3/h
  • Cooling Air Flow: 25,58 m3/s
  • Alternator fan air flow: 1,035 m3/s
  • - STARTING SYSTEM.
  • Starting power: 11,7 kW
  • Starting power: 15,91 CV
  • Auxiliary Voltage: 24 Vdc
  • - FUEL SYSTEM
  • Fuel Oil Specifications: Natural Gas
  • - Dimensions.
  • Length: 4.460 mm
  • Height: 2.670 mm
  • Width: 2.100 mm
  • Maximum shipping volume: 25,01 m3
  • Weight with liquids in radiator and sump: 6.281 kg
Protections
Earth Leakage Protection to 630A from 800A to 3200A
CEx Optionals
Telesignal
Kit CAN / LAN
Change over power source unit AC5 / CC2
Repetitive display: Remote Screen
Alarm Indicator Panel RAM7
Kit CAN/RS-485
Kit CAN/USB
Kit MODBUS TCP/IP
Kit CAN Profibus
Kit CAN/SNMP
C2CLOUD - 3G/GRPS and GPS
Kit CAN/LAN HG
Deepsea Optionals
DSE2133: RTD/THERMOCOUPLE Input Expansion Module
DSE2130:Input Expansion Module
DSE2157:Output Expansion Module
DSE2548:Led Output Expansion Module
DSE2152: Analog Outputs Module
DSE2131:Digital / Resistive inputs module
DSE890
Thermal Magnetic Protection
Change from 4P to 3P for 1000A
Extra to change to motorized circuit breaker 1000A
Deepsea
Change of CEx for DSE7310
Change of CEx for DSE7320 controller

Power


kVA

573
 
665
Prime power  (95 - 679)
Stand by  (106 - 807)

kW

458
 
532
Prime power  (76 - 544)
Stand by  (85 - 645)
 

Sound level

 dB
 Distance (m)

 
 

dimensions


 
dimensions
Long (A)
446
Width (B)
210
High (C)
267
 

Weight


 
Weight
Weight with liquid in radiator and carter

6.281
 

Fuel capacity